Hi Satya, Are you attempting to enable inline protocol (IPsec) functionality? If yes, which PMD (& h/w) are you using for the same?
Thanks, Anoob > -----Original Message----- > From: dev <dev-boun...@dpdk.org> On Behalf Of satyavalli rama > Sent: Tuesday, August 18, 2020 4:08 PM > To: dev@dpdk.org; us...@dpdk.org > Subject: Re: [dpdk-dev] Ipsec-secgw packet processing > > We further debugged and we observed that while running ipsec-secgw > application in transport-mode dpdk-19.02/11, we found that inline packet > processing is not happening. > We observed that ol_flags is not setting from driver level. We are expecting > that , because of ol_flags not set , inline packet processing is not > happening.Any idea What could be the reason for this, I think ol_flags will be > configured from driver level Or else do we need to provide any external > configuration for setting ol_flags. > And also we are not observing encrypt/decrypt packets on pdump before > sending packets out from tx-port(rte_eth_tx_burst()). > Please help us on this...to proceed further. > > Thanks & Regards > Satya > > > > On Mon, 17 Aug, 2020, 4:11 pm satyavalli rama, <satyavalli.r...@gmail.com> > wrote: > > > > > Hello, > > > > While we are running ipsec-secgw application in transport-mode on > > dpdk-19.02, we found that inline packet processing is not happening. > > > > And also we are not observing any encrypt/decrypt packets on pdump > > before sending packets out from tx-port(rte_eth_tx_burst()). > > > > Please help us on how to proceed further. > > > > Thanks, > > Jagadeesh > > > >
