Wrong description was found in the mentioned file,
so fix them.
Signed-off-by: Lifshits Vitaly <vitaly.lifsh...@intel.com>
Signed-off-by: Guinan Sun <guinanx....@intel.com>
---
drivers/net/e1000/base/e1000_80003es2lan.c | 1 -
drivers/net/e1000/base/e1000_ich8lan.c | 6 ++++--
drivers/net/e1000/base/e1000_phy.c | 3 +++
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000/base/e1000_80003es2lan.c
b/drivers/net/e1000/base/e1000_80003es2lan.c
index bcfda9415..b795491c0 100644
--- a/drivers/net/e1000/base/e1000_80003es2lan.c
+++ b/drivers/net/e1000/base/e1000_80003es2lan.c
@@ -1210,7 +1210,6 @@ STATIC s32 e1000_setup_copper_link_80003es2lan(struct
e1000_hw *hw)
/**
* e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
* @hw: pointer to the HW structure
- * @duplex: current duplex setting
*
* Configure the KMRN interface by applying last minute quirks for
* 10/100 operation.
diff --git a/drivers/net/e1000/base/e1000_ich8lan.c
b/drivers/net/e1000/base/e1000_ich8lan.c
index 2e2cf0d25..1dc29553e 100644
--- a/drivers/net/e1000/base/e1000_ich8lan.c
+++ b/drivers/net/e1000/base/e1000_ich8lan.c
@@ -822,7 +822,7 @@ STATIC s32 e1000_init_mac_params_ich8lan(struct e1000_hw
*hw)
/**
* __e1000_access_emi_reg_locked - Read/write EMI register
* @hw: pointer to the HW structure
- * @addr: EMI address to program
+ * @address: EMI address to program
* @data: pointer to value to read/write from/to the EMI address
* @read: boolean flag to indicate read or write
*
@@ -2399,7 +2399,7 @@ STATIC s32 e1000_k1_gig_workaround_hv(struct e1000_hw
*hw, bool link)
/**
* e1000_configure_k1_ich8lan - Configure K1 power state
* @hw: pointer to the HW structure
- * @enable: K1 state to configure
+ * @k1_enable: K1 state to configure
*
* Configure the K1 power state based on the provided parameter.
* Assumes semaphore already acquired.
@@ -2547,6 +2547,7 @@ STATIC s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw
*hw)
/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
+ * @hw: pointer to the HW structure
**/
STATIC s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
@@ -2873,6 +2874,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw
*hw, bool enable)
/**
* e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
+ * @hw: pointer to the HW structure
**/
STATIC s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/e1000/base/e1000_phy.c
b/drivers/net/e1000/base/e1000_phy.c
index c9bb0d4a9..73e2ecda8 100644
--- a/drivers/net/e1000/base/e1000_phy.c
+++ b/drivers/net/e1000/base/e1000_phy.c
@@ -3117,6 +3117,7 @@ s32 e1000_determine_phy_address(struct e1000_hw *hw)
/**
* e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
* @page: page to access
+ * @reg: register to access
*
* Returns the phy address for the page requested.
**/
@@ -3554,6 +3555,7 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw)
* @offset: register offset to be read
* @data: pointer to the read data
* @locked: semaphore has already been acquired or not
+ * @page_set: BM_WUC_PAGE already set and access enabled
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
* and stores the retrieved information in data. Release any acquired
@@ -3664,6 +3666,7 @@ s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32
offset, u16 *data)
* @offset: register offset to write to
* @data: data to write at register offset
* @locked: semaphore has already been acquired or not
+ * @page_set: BM_WUC_PAGE already set and access enabled
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
--
2.17.1
