I225 introduces a new mechanism for Low-Power-Link-Up (LPLU) control.
This patch implements the new functions and sets the PHY OPS pointers.
Signed-off-by: Dima Ruinskiy <dima.ruins...@intel.com>
Signed-off-by: Guinan Sun <guinanx....@intel.com>
---
drivers/net/e1000/base/e1000_i225.c | 58 +++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/net/e1000/base/e1000_i225.c
b/drivers/net/e1000/base/e1000_i225.c
index 621dc6863..dbebb6fa3 100644
--- a/drivers/net/e1000/base/e1000_i225.c
+++ b/drivers/net/e1000/base/e1000_i225.c
@@ -1147,3 +1147,61 @@ s32 e1000_init_hw_i225(struct e1000_hw *hw)
ret_val = e1000_init_hw_82575(hw);
return ret_val;
}
+
+/*
+ * e1000_set_d0_lplu_state_i225 - Set Low-Power-Link-Up (LPLU) D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Note: since I225 does not actually support LPLU, this function
+ * simply enables/disables 1G and 2.5G speeds in D0.
+ */
+s32 e1000_set_d0_lplu_state_i225(struct e1000_hw *hw, bool active)
+{
+ u32 data;
+
+ DEBUGFUNC("e1000_set_d0_lplu_state_i225");
+
+ data = E1000_READ_REG(hw, E1000_I225_PHPM);
+
+ if (active) {
+ data |= E1000_I225_PHPM_DIS_1000;
+ data |= E1000_I225_PHPM_DIS_2500;
+ } else {
+ data &= ~E1000_I225_PHPM_DIS_1000;
+ data &= ~E1000_I225_PHPM_DIS_2500;
+ }
+
+ E1000_WRITE_REG(hw, E1000_I225_PHPM, data);
+ return E1000_SUCCESS;
+}
+
+/*
+ * e1000_set_d3_lplu_state_i225 - Set Low-Power-Link-Up (LPLU) D3 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Note: since I225 does not actually support LPLU, this function
+ * simply enables/disables 100M, 1G and 2.5G speeds in D3.
+ */
+s32 e1000_set_d3_lplu_state_i225(struct e1000_hw *hw, bool active)
+{
+ u32 data;
+
+ DEBUGFUNC("e1000_set_d3_lplu_state_i225");
+
+ data = E1000_READ_REG(hw, E1000_I225_PHPM);
+
+ if (active) {
+ data |= E1000_I225_PHPM_DIS_100_D3;
+ data |= E1000_I225_PHPM_DIS_1000_D3;
+ data |= E1000_I225_PHPM_DIS_2500_D3;
+ } else {
+ data &= ~E1000_I225_PHPM_DIS_100_D3;
+ data &= ~E1000_I225_PHPM_DIS_1000_D3;
+ data &= ~E1000_I225_PHPM_DIS_2500_D3;
+ }
+
+ E1000_WRITE_REG(hw, E1000_I225_PHPM, data);
+ return E1000_SUCCESS;
+}
--
2.17.1
