Hi, I don't know if it's something in my environment, but I am running a basic zone with one pod and one XenServer 6.5 cluster and my VMs don't seem to get IP addresses from the range I specified.
The VM's hostname is not set properly nor does it produce the correct IP address when I run ifconfig. Looking in the GUI, an IP address in the proper range was selected for this VM, though. I hesitate to bring this up, though, because I'm currently running these VMs on a network that has its own DHCP server and I don't know if that would be causing this problem. I thought I should offer up the info, though, just in case that DHCP server should not be causing any issue here. Thanks, Mike On Thu, Nov 5, 2015 at 3:34 AM, Wilder Rodrigues < wrodrig...@schubergphilis.com> wrote: > Hi all, > > I have been busy testing the 4.6.0 RC since last night. The results below > are still partial (I still have to test XenServer 6.5), but it looks very > promising! > > My vote will be given once I’m done with Xen65 and upgrade tests. > > Cheers, > Wilder > > :: Environment 1 :: > > * Hardware required: TRUE > * Management Server + MySQL on CentOS 7.1 > * Two KVM hosts on CentOS 7.1 > * ACS Agent + Common RPMs built from source > > > :: Tests Suites Executed :: > > nosetests --with-marvin > --marvin-config=/data/shared/marvin/mct-zone1-kvm1-ISOLATED.cfg -s -a > tags=advanced,required_hardware=true component/test_vpc_redundant.py > component/test_routers_iptables_default_policy.py > component/test_routers_network_ops.py component/test_vpc_router_nics.py > component/test_password_server.py component/test_router_dhcphosts.py > smoke/test_loadbalance.py smoke/test_internal_lb.py smoke/test_ssvm.py > smoke/test_vpc_vpn.py smoke/test_network.py > > :: Environment 2 :: > > * Hardware required: FALSE > * Management Server + MySQL on CentOS 7.1 > * Two KVM hosts on CentOS 7.1 > * ACS Agent + Common RPMs built from source > > :: Tests Suites Executed :: > > nosetests --with-marvin > --marvin-config=/data/shared/marvin/mct-zone1-kvm1-ISOLATED.cfg -s -a > tags=advanced,required_hardware=false smoke/test_routers.py > smoke/test_reset_vm_on_reboot.py smoke/test_vm_life_cycle.py > component/test_vpc_routers.py smoke/test_service_offerings.py > component/test_vpc_offerings.py smoke/test_network_acl.py > smoke/test_privategw_acl.py smoke/test_network.py > > :: Summary :: > > * Tests executed: 75 > * Successfull tests: 72 > * Skipped tests: 3(*) > * Failed tests: 0 > > (*) Tests were skipped because I had 2 hosts and the current logic in the > tests does not cope with that: it lists the hosts and takes the one in > index zero > - host = hosts[0] > > > :: Test results for Environment 1 :: > > Create a redundant VPC with two networks with two VMs in each network ... > SKIP: Marvin configuration has no host credentials to > check router services > Create a redundant VPC with two networks with two VMs in each network and > check default routes ... SKIP: Marvin configuration has no host credentials > to check router services > Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: > test_02_routervm_iptables_policies | Status : SUCCESS === > ok > Test iptables default INPUT/FORWARD policies on VPC router ... === > TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS === > ok > Test redundant router internals ... === TestName: > test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS > === > ok > Test redundant router internals ... === TestName: > test_02_isolate_network_FW_PF_default_routes_egress_false | Status : > SUCCESS === > ok > Test redundant router internals ... === TestName: > test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS > === > ok > Test redundant router internals ... === TestName: > test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : > SUCCESS === > ok > Create a VPC with two networks with one VM in each network and test nics > after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : > SUCCESS === > ok > Create a VPC with two networks with one VM in each network and test > default routes ... === TestName: test_02_VPC_default_routes | Status : > SUCCESS === > ok > Check the password file in the Router VM ... === TestName: > test_isolate_network_password_server | Status : SUCCESS === > ok > Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === > TestName: test_router_dhcphosts | Status : SUCCESS === > ok > Test to create Load balancing rule with source NAT ... === TestName: > test_01_create_lb_rule_src_nat | Status : SUCCESS === > ok > Test to create Load balancing rule with non source NAT ... === TestName: > test_02_create_lb_rule_non_nat | Status : SUCCESS === > ok > Test for assign & removing load balancing rule ... === TestName: > test_assign_and_removal_lb | Status : SUCCESS === > ok > Test to verify access to loadbalancer haproxy admin stats page ... === > TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : > SUCCESS === > ok > Test create, assign, remove of an Internal LB with roundrobin http traffic > to 3 vm's ... === TestName: > test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS === > ok > Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : > SUCCESS === > ok > Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : > SUCCESS === > ok > Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS === > ok > Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS === > ok > Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS > === > ok > Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS > === > ok > Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : > SUCCESS === > ok > Test destroy CPVM ... SKIP: Marvin configuration has no host > credentials to check router services > Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn > | Status : SUCCESS === > ok > Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : > SUCCESS === > ok > Test for port forwarding on source NAT ... === TestName: > test_01_port_fwd_on_src_nat | Status : SUCCESS === > ok > Test for port forwarding on non source NAT ... === TestName: > test_02_port_fwd_on_non_src_nat | Status : SUCCESS === > ok > Test for reboot router ... === TestName: test_reboot_router | Status : > SUCCESS === > ok > Test for Router rules for network rules on acquired public IP ... === > TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status > : SUCCESS === > ok > Test for Router rules for network rules on acquired public IP ... === > TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : > SUCCESS === > ok > Test for Router rules for network rules on acquired public IP ... === > TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | > Status : SUCCESS === > ok > ---------------------------------------------------------------------- > Ran 33 tests in 12005.160s > > OK (SKIP=3) > (END) > > > :: Test results for Environment 1 :: > > > Test router internal advanced zone ... === TestName: > test_02_router_internal_adv | Status : SUCCESS === > ok > Test restart network ... === TestName: test_03_restart_network_cleanup | > Status : SUCCESS === > ok > Test router basic setup ... === TestName: test_05_router_basic | Status : > SUCCESS === > ok > Test router advanced setup ... === TestName: test_06_router_advanced | > Status : SUCCESS === > ok > Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS > === > ok > Test start router ... === TestName: test_08_start_router | Status : > SUCCESS === > ok > Test reboot router ... === TestName: test_09_reboot_router | Status : > SUCCESS === > ok > Test reset virtual machine on reboot ... === TestName: > test_01_reset_vm_on_reboot | Status : SUCCESS === > ok > Test advanced zone virtual router ... === TestName: > test_advZoneVirtualRouter | Status : SUCCESS === > ok > Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : > SUCCESS === > ok > Test Multiple Deploy Virtual Machine ... === TestName: > test_deploy_vm_multiple | Status : SUCCESS === > ok > Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : > SUCCESS === > ok > Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : > SUCCESS === > ok > Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : > SUCCESS === > ok > Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status > : SUCCESS === > ok > Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status > : SUCCESS === > ok > Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS === > ok > Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm > | Status : SUCCESS === > ok > Test start/stop of router after addition of one guest network ... === > TestName: test_01_start_stop_router_after_addition_of_one_guest_network | > Status : SUCCESS === > ok > Test reboot of router after addition of one guest network ... === > TestName: test_02_reboot_router_after_addition_of_one_guest_network | > Status : SUCCESS === > ok > Test to change service offering of router after addition of one guest > network ... === TestName: > test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : > SUCCESS === > ok > Test destroy of router after addition of one guest network ... === > TestName: test_05_destroy_router_after_addition_of_one_guest_network | > Status : SUCCESS === > ok > Test to stop and start router after creation of VPC ... === TestName: > test_01_stop_start_router_after_creating_vpc | Status : SUCCESS === > ok > Test to reboot the router after creating a VPC ... === TestName: > test_02_reboot_router_after_creating_vpc | Status : SUCCESS === > ok > Tests to change service offering of the Router after ... === TestName: > test_04_change_service_offerring_vpc | Status : SUCCESS === > ok > Test to destroy the router after creating a VPC ... === TestName: > test_05_destroy_router_after_creating_vpc | Status : SUCCESS === > ok > Test to create service offering ... === TestName: > test_01_create_service_offering | Status : SUCCESS === > ok > Test to update existing service offering ... === TestName: > test_02_edit_service_offering | Status : SUCCESS === > ok > Test to delete service offering ... === TestName: > test_03_delete_service_offering | Status : SUCCESS === > ok > Test create VPC offering ... === TestName: test_01_create_vpc_offering | > Status : SUCCESS === > ok > Test VPC offering without load balancing service ... === TestName: > test_03_vpc_off_without_lb | Status : SUCCESS === > ok > Test VPC offering without static NAT service ... === TestName: > test_04_vpc_off_without_static_nat | Status : SUCCESS === > ok > Test VPC offering without port forwarding service ... === TestName: > test_05_vpc_off_without_pf | Status : SUCCESS === > ok > Test VPC offering with invalid services ... === TestName: > test_06_vpc_off_invalid_services | Status : SUCCESS === > ok > Test update VPC offering ... === TestName: test_07_update_vpc_off | Status > : SUCCESS === > ok > Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : > SUCCESS === > ok > test_09_create_redundant_vpc_offering > (integration.component.test_vpc_offerings.TestVPCOffering) ... === > TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS === > ok > test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) > ... === TestName: test_privategw_acl | Status : SUCCESS === > ok > Test for delete account ... === TestName: test_delete_account | Status : > SUCCESS === > ok > Test for Associate/Disassociate public IP address for admin account ... > === TestName: test_public_ip_admin_account | Status : SUCCESS === > ok > Test for Associate/Disassociate public IP address for user account ... === > TestName: test_public_ip_user_account | Status : SUCCESS === > ok > Test for release public IP address ... === TestName: test_releaseIP | > Status : SUCCESS === > ok > > ---------------------------------------------------------------------- > Ran 42 tests in 7997,337s > > OK > (END) > > > > > On 05 Nov 2015, at 09:48, Nux! <n...@li.nux.ro> wrote: > > > > Thanks Remi! > > > > -- > > Sent from the Delta quadrant using Borg technology! > > > > Nux! > > www.nux.ro > > > > ----- Original Message ----- > >> From: "Remi Bergsma" <rberg...@schubergphilis.com> > >> To: dev@cloudstack.apache.org > >> Sent: Wednesday, 4 November, 2015 20:45:59 > >> Subject: Re: [VOTE] Apache CloudStack 4.6.0 > > > >> Kicked off some Jenkins builds: > >> > >> CentOS 6 packages: > >> > http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter/lastSuccessfulBuild/artifact/dist/rpmbuild/RPMS/x86_64/ > >> > >> CentOS 7 packages: > >> > http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter-centos7/lastSuccessfulBuild/artifact/dist/rpmbuild/RPMS/x86_64/ > >> > >> Ubuntu Trusty packages: > >> http://cloudstack.apt-get.eu/ubuntu/dists/trusty/4.6/pool/ > >> > >> SystemVM template: > >> > http://jenkins.buildacloud.org/view/parameterized/job/parameterized-sytemvm/lastSuccessfulBuild/artifact/tools/appliance/dist/ > >> > >> > >> You can always build packages from the source: > >> cd packaging > >> ./package.sh -h > >> > >> Happy testing! > >> > >> Regards, > >> Remi > >> > >> > >> > >> > >> > >> On 04/11/15 18:12, "Remi Bergsma" <rberg...@schubergphilis.com> wrote: > >> > >>> The jobs failed due to the git clone failing (time out). I also > experience it is > >>> quite slow at the moment. > >>> > >>> It is mirrored here (same commit id): > >>> https://github.com/apache/cloudstack/tree/4.6.0-RC20151104T1522 > >>> > >>> Regards, > >>> Remi > >>> > >>> > >>> > >>> > >>> On 04/11/15 17:17, "Rajani Karuturi" <rajani.karut...@citrix.com> > wrote: > >>> > >>>> I started jenkins builds for cloudstack RPM packages and systemvm > templates for > >>>> this branch here > >>>> > >>>> > http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter/19/console > >>>> > http://jenkins.buildacloud.org/view/parameterized/job/parameterized-sytemvm/3/console > >>>> > >>>> We can use them once the build is complete. > >>>> > >>>> ~Rajani > >>>> > >>>> On 04-Nov-2015, at 8:58 PM, Nux! <n...@li.nux.ro<mailto:n...@li.nux.ro>> > wrote: > >>>> > >>>> Hi, > >>>> > >>>> Has jenkins built rpms for this somewhere? > >>>> > >>>> -- > >>>> Sent from the Delta quadrant using Borg technology! > >>>> > >>>> Nux! > >>>> www.nux.ro<http://www.nux.ro> > >>>> > >>>> ----- Original Message ----- > >>>> From: "Remi Bergsma" <rberg...@schubergphilis.com> > >>>> To: dev@cloudstack.apache.org > >>>> Sent: Wednesday, 4 November, 2015 14:55:11 > >>>> Subject: [VOTE] Apache CloudStack 4.6.0 > >>>> > >>>> Hi all, > >>>> > >>>> I've created a 4.6.0 release candidate, with the following artifacts > up for a > >>>> vote: > >>>> > >>>> Git Branch and Commit SH: > >>>> > https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=4.6.0-RC20151104T1522 > >>>> > >>>> Commit: b0ebe68e375432b28eef031ab62ccd5831234c77 > >>>> > >>>> Source release (checksums and signatures are available at the same > >>>> location): > >>>> https://dist.apache.org/repos/dist/dev/cloudstack/4.6.0/ > >>>> > >>>> PGP release keys (signed using A47DDC4F): > >>>> https://dist.apache.org/repos/dist/release/cloudstack/KEYS > >>>> > >>>> Vote will be open for at least 72 hours. > >>>> > >>>> For sanity in tallying the vote, can PMC members please be sure to > indicate > >>>> "(binding)" with their vote? > >>>> > >>>> [ ] +1 approve > >>>> [ ] +0 no opinion > >>>> [ ] -1 disapprove (and reason why) > > -- *Mike Tutkowski* *Senior CloudStack Developer, SolidFire Inc.* e: mike.tutkow...@solidfire.com o: 303.746.7302 Advancing the way the world uses the cloud <http://solidfire.com/solution/overview/?video=play>*™*
