Hey Marcus, Thanks for all the detail.
Yeah, I'm running the CSMS on my host OS, which is Mac OS X 10.8.3. I have VMware Fusion running Ubuntu 12.04.1 with KVM and am able to run VMs from Virtual Machine Manager. I have not yet tried adding this KVM host to CS because I was afraid my network settings were not configured properly. Currently - without making any networking changes like those described in that help doc - I've assigned an IP address statically to Ubuntu (from VMware host-only network) and can ping it from Mac OS X. I guess I wasn't sure how far I needed to take the networking to get this to the point where I could add this KVM host to CS and be able to run VMs on it. Thanks! On Thu, Sep 5, 2013 at 10:25 PM, Marcus Sorensen <shadow...@gmail.com>wrote: > make sure all of the traffic labels are set to the name of the > bridge... this is the 'edit' button under the round network icons > during setup. > > On Thu, Sep 5, 2013 at 10:23 PM, Marcus Sorensen <shadow...@gmail.com> > wrote: > > Well, you sort of have to know what you want to do, that is decide > > where management, guest, public traffic is going to go. You don't > > really need working public traffic just to run vms, and guest traffic > > will stay local to the vm, so that leaves management traffic, which > > also doesn't really need to access anything outside of the VM unless > > you've got an external secondary storage or are running the mgmt > > server on your mac or something. > > > > I think if you've solved your fusion networking problem (meaning you > > can create a vm and the host can talk to it), you've already got a > > head start with devcloud-kvm. You may have to set it to use dhcp > > again, ignoring the NAT setup that it does (which I mainly just use to > > register templates and debug VPC networking) and ignore one of the > > interfaces, but it's preconfigured with secondary storage, primary > > storage, and dependencies. In other words, I hope you didn't give up > > on it and start from scratch just because of the NAT issues, as it > > would be much easier just to tweak it to do what you're doing now. > > > > In either case, assuming you do care about networking, but host-only > > is fine and you want that to be management, I'd set up a bridge on > > eth0, assign it an IP that the host can reach (dhcp?), and then when > > you fill out the pod network info I'd leave the vlan field blank. Then > > filling out the network icons, I'd set the 'traffic label' to the name > > of the bridge you created for eth0. Then for public traffic I'd make > > up an ip range and vlan, and for guest traffic I'd also make up a vlan > > range. Those bridges will be created automatically, and will work just > > fine within the scope of the single host. You can probably find > > ubuntu-specific info on how to make a bridge on eth0, just a shot in > > the dark, might be something like: > > > > # change eth0 to have no config > > iface eth0 inet manual > > > > # mgt network > > auto cloudmgt > > iface cloudmgt inet dhcp > > bridge_ports eth0 > > bridge_fd 5 > > bridge_stp off > > bridge_maxwait 1 > > > > On Thu, Sep 5, 2013 at 9:05 PM, Mike Tutkowski > > <mike.tutkow...@solidfire.com> wrote: > >> So, I'm trying to follow the directions here on updating my interfaces > file > >> on Ubuntu 12.04.1: > >> > >> > http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/hypervisor-kvm-install-flow.html > >> > >> I am running Ubuntu in a VMware Fusion VM with using what Fusion calls a > >> "custom network" (I believe this is a host-only network). I'm not using > >> VLANs. > >> > >> Any thoughts on how I should modify my interfaces file for my situation > >> (below is the interfaces file from the CS docs): > >> > >> Thanks! > >> > >> auto lo > >> iface lo inet loopback > >> > >> # The primary network interface > >> auto eth0.100 > >> iface eth0.100 inet static > >> address 192.168.42.11 > >> netmask 255.255.255.240 > >> gateway 192.168.42.1 > >> dns-nameservers 8.8.8.8 8.8.4.4 > >> dns-domain lab.example.org > >> > >> # Public network > >> auto cloudbr0 > >> iface cloudbr0 inet manual > >> bridge_ports eth0.200 > >> bridge_fd 5 > >> bridge_stp off > >> bridge_maxwait 1 > >> > >> # Private network > >> auto cloudbr1 > >> iface cloudbr1 inet manual > >> bridge_ports eth0.300 > >> bridge_fd 5 > >> bridge_stp off > >> bridge_maxwait 1 > >> > >> > >> > >> On Fri, Aug 30, 2013 at 8:06 PM, Marcus Sorensen <shadow...@gmail.com > >wrote: > >> > >>> I'm not sure about the history of the agent. The libvirt api is > remotely > >>> accessible, but it has proven to be a moving target, and at least > early on > >>> it was insufficient. There are other things the agent does as well, > which > >>> are not directly related to libvirt, like logging into virtual routers > and > >>> programming them. On the Xen side I believe the APIs are sufficient for > >>> that, but on Linux /kvm the alternative would be ssh commands wrapped > in > >>> ssh commands. > >>> > >>> I believe with the new architecture your plugin can still configure > the SAN > >>> via mgmt server, but connecting the disk on the host needs to be done > by > >>> the agent. > >>> On Aug 30, 2013 7:46 PM, "Mike Tutkowski" < > mike.tutkow...@solidfire.com> > >>> wrote: > >>> > >>> > Hey Marcus, > >>> > > >>> > I have a general design question here. > >>> > > >>> > For the XenServer and VMware plug-ins, the Java code runs on the > CSMS, > >>> but > >>> > for KVM it runs on the host. > >>> > > >>> > Can you give me an idea why there is this difference? > >>> > > >>> > I'm just getting up to speed on libvert, so maybe it doesn't have a > >>> daemon > >>> > that runs that accepts API calls (or its API is insufficient)? Can > you > >>> > clarify this for me? > >>> > > >>> > Thanks! > >>> > > >>> > > >>> > On Fri, Aug 30, 2013 at 7:28 PM, Mike Tutkowski < > >>> > mike.tutkow...@solidfire.com> wrote: > >>> > > >>> > > Thanks, Marcus > >>> > > > >>> > > I believe I will only need to modify LibvirtComputingResource for > KVM > >>> > > support (based on my experience in 4.2 with CitrixResourceBase and > >>> > > VmwareResource). > >>> > > > >>> > > It will need to be updated to work with CloudStack's managed > storage > >>> > > (first introduced in the new storage framework in 4.2 and > supported in > >>> > > XenServer and VMware). > >>> > > > >>> > > Edison made large modifications to the storage component in 4.2 > and I > >>> > > wrote a plug-in for SolidFire storage. To fully leverage what the > >>> plug-in > >>> > > does, I needed to modify logic in the storage framework and > hypervisor > >>> > > plug-ins (so they didn't assume that storage was necessarily > >>> > preallocated - > >>> > > it might be created on demand now). > >>> > > > >>> > > > >>> > > On Fri, Aug 30, 2013 at 5:51 PM, Marcus Sorensen < > shadow...@gmail.com > >>> > >wrote: > >>> > > > >>> > >> Er. I mean normal users don't have to deal with jar files. I > always > >>> > >> install the agent code via rpm when I'm developing, rather than > >>> > >> messing with jars, since you rarely just touch one thing in the > agent, > >>> > >> it's usually a script, or LibvirtComputingResource + some other > class > >>> > >> files, and it can be easy to miss something. It's easier to just > built > >>> > >> the packages during the compile and install the whole thing. > >>> > >> > >>> > >> On Fri, Aug 30, 2013 at 5:49 PM, Marcus Sorensen < > shadow...@gmail.com > >>> > > >>> > >> wrote: > >>> > >> > Package refers to a .deb or a .rpm, the packages used to > install. > >>> > >> > Normal users never have to deal with them. > >>> > >> > > >>> > >> > Since you're not developing, you can get them from the website > and > >>> > >> > install as a normal user would, but to create them look in the > >>> > >> > 'packaging' directory, there's a script for ubuntu(debs) and > one for > >>> > >> > centos (rpms). > >>> > >> > > >>> > >> > On Fri, Aug 30, 2013 at 2:23 PM, Mike Tutkowski > >>> > >> > <mike.tutkow...@solidfire.com> wrote: > >>> > >> >> Looking at some CS docs on the web, it appears we are using the > >>> term > >>> > >> >> "package" here to refer to a JAR file. > >>> > >> >> > >>> > >> >> > >>> > >> >> On Fri, Aug 30, 2013 at 2:20 PM, Mike Tutkowski < > >>> > >> >> mike.tutkow...@solidfire.com> wrote: > >>> > >> >> > >>> > >> >>> I should be a litter clearer. :) I was referring to what you > said > >>> > >> here, > >>> > >> >>> Marcus: > >>> > >> >>> > >>> > >> >>> "If you are developing, I'd generate the .debs, copy agent and > >>> > common > >>> > >> >>> packages over, install those" > >>> > >> >>> > >>> > >> >>> What I'm not sure how to do is generate the .deb files for CS > 4.2. > >>> > >> >>> > >>> > >> >>> Also, when you say copy agent and common packages over, do you > >>> just > >>> > >> mean > >>> > >> >>> the JAR files? If so, do you know where I put them? Is there > an > >>> > >> install > >>> > >> >>> script of some sort on the KVM side I should be running then? > >>> > >> >>> > >>> > >> >>> Thanks! > >>> > >> >>> > >>> > >> >>> > >>> > >> >>> On Fri, Aug 30, 2013 at 2:16 PM, Mike Tutkowski < > >>> > >> >>> mike.tutkow...@solidfire.com> wrote: > >>> > >> >>> > >>> > >> >>>> Thanks for that info, Marcus > >>> > >> >>>> > >>> > >> >>>> I did have to assign a password explicitly to the root user > >>> > >> (Ubuntu). Now > >>> > >> >>>> I can SSH in with root. > >>> > >> >>>> > >>> > >> >>>> I've never needed to generate .debs and all of that for > >>> CloudStack. > >>> > >> Do > >>> > >> >>>> you know where I might be able to find info on the process to > >>> > follow > >>> > >> to do > >>> > >> >>>> what you wrote? > >>> > >> >>>> > >>> > >> >>>> Thanks again! > >>> > >> >>>> > >>> > >> >>>> > >>> > >> >>>> On Fri, Aug 30, 2013 at 7:45 AM, Marcus Sorensen < > >>> > >> shadow...@gmail.com>wrote: > >>> > >> >>>> > >>> > >> >>>>> I'm not sure if you are developing or just trying to get a > >>> system > >>> > >> >>>>> running. > >>> > >> >>>>> If the latter, you should be using the same repo and deb > >>> packages > >>> > >> for > >>> > >> >>>>> both > >>> > >> >>>>> the mgt server and agent, such that everything can be > installed > >>> > via > >>> > >> >>>>> 'apt-get install', which is hopefully covered in the docs. > >>> > >> >>>>> > >>> > >> >>>>> If you are developing, I'd generate the .debs, copy agent > and > >>> > common > >>> > >> >>>>> packages over, install those, and then if agent code changes > >>> > during > >>> > >> >>>>> development you can either do that again, or manually > replace > >>> the > >>> > >> >>>>> affected > >>> > >> >>>>> jars/scripts and restart the agent. > >>> > >> >>>>> > >>> > >> >>>>> As far as I'm aware the agent needs to run with root > permissions > >>> > on > >>> > >> the > >>> > >> >>>>> box. It sounds like you need to fix ssh as a prerequisite > before > >>> > >> >>>>> beginning > >>> > >> >>>>> setup. As mentioned it might be the PermitRootLogin option. > >>> > >> >>>>> On Aug 29, 2013 11:22 PM, "Mike Tutkowski" < > >>> > >> mike.tutkow...@solidfire.com > >>> > >> >>>>> > > >>> > >> >>>>> wrote: > >>> > >> >>>>> > >>> > >> >>>>> > I figured out how to assign a password to root on Ubuntu, > but > >>> > that > >>> > >> >>>>> didn't > >>> > >> >>>>> > solve the problem. > >>> > >> >>>>> > > >>> > >> >>>>> > As I thought about it more, I'm actually running the 4.2 > CSMS, > >>> > >> but the > >>> > >> >>>>> 4.1 > >>> > >> >>>>> > version of the agent code on the KVM host. > >>> > >> >>>>> > > >>> > >> >>>>> > I'm not sure how to deploy the newest agent code from the > 4.2 > >>> > >> branch > >>> > >> >>>>> to the > >>> > >> >>>>> > KVM host, though. Would you be able to tell me how to do > that, > >>> > >> Marcus? > >>> > >> >>>>> > > >>> > >> >>>>> > Is there any Java code of ours on the KVM host or is it > all in > >>> > the > >>> > >> >>>>> form of > >>> > >> >>>>> > scripts? > >>> > >> >>>>> > > >>> > >> >>>>> > Thanks! > >>> > >> >>>>> > > >>> > >> >>>>> > > >>> > >> >>>>> > On Thu, Aug 29, 2013 at 10:30 PM, Mike Tutkowski < > >>> > >> >>>>> > mike.tutkow...@solidfire.com> wrote: > >>> > >> >>>>> > > >>> > >> >>>>> > > Yeah, I wanted to use root, but got the following when > >>> trying > >>> > >> to SSH > >>> > >> >>>>> in: > >>> > >> >>>>> > > > >>> > >> >>>>> > > mtutkowski-LT:~ mtutkowski$ ssh root@172.16.140.5 > >>> > >> >>>>> > > root@172.16.140.5's password: > >>> > >> >>>>> > > Permission denied, please try again. > >>> > >> >>>>> > > > >>> > >> >>>>> > > > >>> > >> >>>>> > > On Thu, Aug 29, 2013 at 10:28 PM, Marcus Sorensen < > >>> > >> >>>>> shadow...@gmail.com > >>> > >> >>>>> > >wrote: > >>> > >> >>>>> > > > >>> > >> >>>>> > >> I've only ever seen it work with root. Do the docs say > >>> > >> otherwise? > >>> > >> >>>>> Maybe > >>> > >> >>>>> > >> your user credentials will work if you have it set with > >>> sudo > >>> > >> >>>>> privileges > >>> > >> >>>>> > >> and > >>> > >> >>>>> > >> privileges to libvirtd. > >>> > >> >>>>> > >> On Aug 29, 2013 10:25 PM, "Mike Tutkowski" < > >>> > >> >>>>> > mike.tutkow...@solidfire.com> > >>> > >> >>>>> > >> wrote: > >>> > >> >>>>> > >> > >>> > >> >>>>> > >> > By the way, I've been supplying the username I log > into > >>> > >> Ubuntu > >>> > >> >>>>> with: > >>> > >> >>>>> > >> > mtutkowski (not root). I think that's correct for > Ubuntu. > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > After the script executes, I get the following back > in > >>> the > >>> > >> CSMS > >>> > >> >>>>> log: > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > { Ans: , MgmtId: 1, via: 2, Ver: v1, Flags: 100010, > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >>> > >> > [{"com.cloud.agent.api.AgentControlAnswer":{"result":true,"wait":0}}] > >>> > >> >>>>> > } > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > On Thu, Aug 29, 2013 at 10:20 PM, Mike Tutkowski < > >>> > >> >>>>> > >> > mike.tutkow...@solidfire.com> wrote: > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > > I don't see a process by either name in System > Monitor. > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > Is that SSH call supposed to have started such a > >>> process > >>> > >> >>>>> running? > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > On Thu, Aug 29, 2013 at 10:15 PM, Marcus Sorensen < > >>> > >> >>>>> > >> shadow...@gmail.com > >>> > >> >>>>> > >> > >wrote: > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > >> Is the agent running? Or perhaps > cloud-setup-agent? > >>> > >> >>>>> > >> > >> On Aug 29, 2013 10:13 PM, "Mike Tutkowski" < > >>> > >> >>>>> > >> > mike.tutkow...@solidfire.com> > >>> > >> >>>>> > >> > >> wrote: > >>> > >> >>>>> > >> > >> > >>> > >> >>>>> > >> > >> > Interesting...there is an agent folder, but no > files > >>> > in > >>> > >> it. > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > On Thu, Aug 29, 2013 at 10:10 PM, Mike > Tutkowski < > >>> > >> >>>>> > >> > >> > mike.tutkow...@solidfire.com> wrote: > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > > Thanks! > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > By the way, these are the parameters I pass > into > >>> > >> >>>>> > >> > >> cloudstack-setup-agent > >>> > >> >>>>> > >> > >> > > (just in case something looks odd to you > there): > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > -m 172.16.140.1 -z 1 -p 1 -c 3 -g > >>> > >> >>>>> > >> > >> 8bd34de8-783c-387f-a043-aa53ee31df6b -a > >>> > >> >>>>> > >> > >> > > --pubNic=cloudbr0 --prvNic=cloudbr0 > >>> > >> --guestNic=cloudbr0 > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > On Thu, Aug 29, 2013 at 10:07 PM, Marcus > Sorensen > >>> < > >>> > >> >>>>> > >> > >> shadow...@gmail.com > >>> > >> >>>>> > >> > >> > >wrote: > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > >> /var/log/cloudstack/agent/agent.log ... > There is > >>> > >> also a > >>> > >> >>>>> setup > >>> > >> >>>>> > >> log > >>> > >> >>>>> > >> > in > >>> > >> >>>>> > >> > >> > that > >>> > >> >>>>> > >> > >> > >> location to see if something in the agent > setup > >>> > went > >>> > >> awry. > >>> > >> >>>>> > >> > >> > >> On Aug 29, 2013 10:05 PM, "Mike Tutkowski" < > >>> > >> >>>>> > >> > >> > mike.tutkow...@solidfire.com> > >>> > >> >>>>> > >> > >> > >> wrote: > >>> > >> >>>>> > >> > >> > >> > >>> > >> >>>>> > >> > >> > >> > Thanks, Marcus > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > I'm not used to playing around in a KVM > >>> > >> environment. > >>> > >> >>>>> Can you > >>> > >> >>>>> > >> tell > >>> > >> >>>>> > >> > >> me > >>> > >> >>>>> > >> > >> > >> where > >>> > >> >>>>> > >> > >> > >> > our agent logs are on KVM? > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > Originally I didn't have SSH installed, > but I > >>> > >> noticed > >>> > >> >>>>> that > >>> > >> >>>>> > >> > problem > >>> > >> >>>>> > >> > >> > while > >>> > >> >>>>> > >> > >> > >> > stepping through the debugger. After I > >>> installed > >>> > >> it, > >>> > >> >>>>> the SSH > >>> > >> >>>>> > >> call > >>> > >> >>>>> > >> > >> went > >>> > >> >>>>> > >> > >> > >> > through just fine as far as the CSMS was > >>> > >> concerned, so > >>> > >> >>>>> - as > >>> > >> >>>>> > >> you > >>> > >> >>>>> > >> > >> say - > >>> > >> >>>>> > >> > >> > I > >>> > >> >>>>> > >> > >> > >> was > >>> > >> >>>>> > >> > >> > >> > thinking I should take a look on the KVM > side > >>> and > >>> > >> see if > >>> > >> >>>>> > >> maybe an > >>> > >> >>>>> > >> > >> > error > >>> > >> >>>>> > >> > >> > >> > occurred that it didn't report back. > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > On Thu, Aug 29, 2013 at 9:57 PM, Marcus > >>> Sorensen > >>> > < > >>> > >> >>>>> > >> > >> shadow...@gmail.com > >>> > >> >>>>> > >> > >> > >> > >wrote: > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > Normally the agent service starts and > >>> connects > >>> > >> up. The > >>> > >> >>>>> > mgmt > >>> > >> >>>>> > >> > >> server > >>> > >> >>>>> > >> > >> > >> uses > >>> > >> >>>>> > >> > >> > >> > ssh > >>> > >> >>>>> > >> > >> > >> > > to start the agent and set it up for the > >>> first > >>> > >> time. > >>> > >> >>>>> You > >>> > >> >>>>> > >> will > >>> > >> >>>>> > >> > >> > probably > >>> > >> >>>>> > >> > >> > >> > need > >>> > >> >>>>> > >> > >> > >> > > to look at the agent logs and see if it > is > >>> > having > >>> > >> >>>>> trouble > >>> > >> >>>>> > >> > >> connecting > >>> > >> >>>>> > >> > >> > >> to > >>> > >> >>>>> > >> > >> > >> > the > >>> > >> >>>>> > >> > >> > >> > > mgmt server or something (firewall?). > >>> > >> >>>>> > >> > >> > >> > > On Aug 29, 2013 9:55 PM, "Mike > Tutkowski" < > >>> > >> >>>>> > >> > >> > >> mike.tutkow...@solidfire.com> > >>> > >> >>>>> > >> > >> > >> > > wrote: > >>> > >> >>>>> > >> > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > So, now I'm trying to add a KVM host > to CS > >>> > and > >>> > >> am > >>> > >> >>>>> > having a > >>> > >> >>>>> > >> > bit > >>> > >> >>>>> > >> > >> of > >>> > >> >>>>> > >> > >> > >> > trouble > >>> > >> >>>>> > >> > >> > >> > > > with LibvirtServerDiscoverer finding it > >>> (this > >>> > >> line > >>> > >> >>>>> > below: > >>> > >> >>>>> > >> > >> > >> List<HostVO> > >>> > >> >>>>> > >> > >> > >> > > > hosts = > >>> > >> >>>>> > >> > >> > >>> _resourceMgr.listAllUpAndEnabledHosts(Host.Type.Routing, > >>> > >> >>>>> > >> > >> > >> > > clusterId, > >>> > >> >>>>> > >> > >> > >> > > > podId, dcId);). > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > private HostVO > waitForHostConnect(long > >>> > >> dcId, > >>> > >> >>>>> long > >>> > >> >>>>> > >> podId, > >>> > >> >>>>> > >> > >> > >> > > > longclusterId, String guid) { > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > for (int i = 0; i < _waitTime > * 2; > >>> > >> i++) { > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > List<HostVO> hosts = > >>> _resourceMgr > >>> > >> >>>>> > >> > >> > >> > > > > >>> .listAllUpAndEnabledHosts(Host.Type.Routing, > >>> > >> >>>>> clusterId, > >>> > >> >>>>> > >> > podId, > >>> > >> >>>>> > >> > >> > >> dcId); > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > for (HostVO host : hosts) { > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > if > >>> > >> >>>>> > >> (host.getGuid().equalsIgnoreCase(guid)) { > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > return host; > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > } > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > } > >>> > >> >>>>> > >> > >> > >> > > > Any thoughts on how I might debug > this? Is > >>> > >> there a > >>> > >> >>>>> log > >>> > >> >>>>> > on > >>> > >> >>>>> > >> the > >>> > >> >>>>> > >> > >> KVM > >>> > >> >>>>> > >> > >> > >> host > >>> > >> >>>>> > >> > >> > >> > I > >>> > >> >>>>> > >> > >> > >> > > > should be looking at? I don't see a > >>> relevant > >>> > >> entry > >>> > >> >>>>> in my > >>> > >> >>>>> > >> > >> > cloud.host > >>> > >> >>>>> > >> > >> > >> > > table. > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > Thanks! > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > On Thu, Aug 29, 2013 at 7:56 PM, Mike > >>> > >> Tutkowski < > >>> > >> >>>>> > >> > >> > >> > > > mike.tutkow...@solidfire.com> wrote: > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > > Thanks, Marty - that solved the > problem! > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > On Thu, Aug 29, 2013 at 4:56 PM, > Marty > >>> > Sweet > >>> > >> < > >>> > >> >>>>> > >> > >> > >> msweet....@gmail.com> > >>> > >> >>>>> > >> > >> > >> > > > wrote: > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > >> Hi Mike, > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > >> Something like this should help: > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >>> http://en.kioskea.net/faq/809-debian-apt-get-no-pubkey-gpg-error > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > >> Marty > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > >> On Thursday, August 29, 2013, Mike > >>> > Tutkowski > >>> > >> >>>>> wrote: > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > Any thoughts on this, Wei? > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > W: GPG error: > >>> > >> http://cloudstack.apt-get.euprecise > >>> > >> >>>>> > >> > >> Release: > >>> > >> >>>>> > >> > >> > >> The > >>> > >> >>>>> > >> > >> > >> > > > >> following > >>> > >> >>>>> > >> > >> > >> > > > >> > signatures couldn't be verified > >>> because > >>> > >> the > >>> > >> >>>>> public > >>> > >> >>>>> > >> key > >>> > >> >>>>> > >> > is > >>> > >> >>>>> > >> > >> not > >>> > >> >>>>> > >> > >> > >> > > > available: > >>> > >> >>>>> > >> > >> > >> > > > >> > NO_PUBKEY BBFCFE5386C278E3 > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > On Thu, Aug 29, 2013 at 4:21 PM, > Mike > >>> > >> >>>>> Tutkowski < > >>> > >> >>>>> > >> > >> > >> > > > >> > mike.tutkow...@solidfire.com> > wrote: > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > > Thanks for the repo info, Wei! > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > On Thu, Aug 29, 2013 at 4:19 > PM, Wei > >>> > >> ZHOU < > >>> > >> >>>>> > >> > >> > >> > ustcweiz...@gmail.com> > >>> > >> >>>>> > >> > >> > >> > > > >> wrote: > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> You need to add a repo, or > download > >>> > >> the deb > >>> > >> >>>>> > files > >>> > >> >>>>> > >> and > >>> > >> >>>>> > >> > >> > >> install > >>> > >> >>>>> > >> > >> > >> > > them. > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > >> for CentOS/RHEL, > >>> > >> >>>>> > >> > >> http://cloudstack.apt-get.eu/rhel/4.1/ > >>> > >> >>>>> > >> > >> > >> > > > >> > >> for Ubuntu, > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > > >>> > http://cloudstack.apt-get.eu/ubuntu/dists/precise/4.1/pool/ > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > >> 2013/8/29 Mike Tutkowski < > >>> > >> >>>>> > >> > mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > Maybe I need to add a repo > for > >>> > >> >>>>> CloudStack? I > >>> > >> >>>>> > >> didn't > >>> > >> >>>>> > >> > >> see > >>> > >> >>>>> > >> > >> > >> that > >>> > >> >>>>> > >> > >> > >> > in > >>> > >> >>>>> > >> > >> > >> > > > the > >>> > >> >>>>> > >> > >> > >> > > > >> > KVM > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > section, but perhaps it was > >>> earlier > >>> > >> in the > >>> > >> >>>>> > >> > >> > documentation. > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > On Thu, Aug 29, 2013 at 3:35 > PM, > >>> > Mike > >>> > >> >>>>> > Tutkowski > >>> > >> >>>>> > >> < > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > mike.tutkow...@solidfire.com > > > >>> > wrote: > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Hi, > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > For the past nine months > that > >>> > I've > >>> > >> been > >>> > >> >>>>> > >> working > >>> > >> >>>>> > >> > >> with > >>> > >> >>>>> > >> > >> > >> > > > CloudStack, > >>> > >> >>>>> > >> > >> > >> > > > >> > I've > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > exclusively used XenServer > and > >>> > >> ESXi as > >>> > >> >>>>> my > >>> > >> >>>>> > >> hosts. > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > I am now trying out KVM and > >>> > >> following > >>> > >> >>>>> the > >>> > >> >>>>> > >> > >> instruction > >>> > >> >>>>> > >> > >> > >> here: > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > >>> > >> >>>>> > > >>> > >> >>>>> > >>> > >> > >>> > > >>> > http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/hypervisor-kvm-install-flow.html > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > I am unable to install the > >>> > >> >>>>> cloudstack-agent > >>> > >> >>>>> > >> > >> package on > >>> > >> >>>>> > >> > >> > >> my > >>> > >> >>>>> > >> > >> > >> > KVM > >>> > >> >>>>> > >> > >> > >> > > > >> host > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > (Ubuntu > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > 12.04.1), however. > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > mtutkowski@ubuntu:~$ sudo > >>> > apt-get > >>> > >> >>>>> install > >>> > >> >>>>> > >> > >> > >> cloudstack-agent > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Reading package lists... > Done > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Building dependency tree > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Reading state > information... > >>> Done > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > E: Unable to locate package > >>> > >> >>>>> cloudstack-agent > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Any thoughts on this? > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Thanks! > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > -- > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *Senior CloudStack > Developer, > >>> > >> SolidFire > >>> > >> >>>>> > Inc.* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > e: > >>> mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Advancing the way the world > >>> uses > >>> > >> the > >>> > >> >>>>> cloud< > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> http://solidfire.com/solution/overview/?video=play > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *™* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > -- > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > *Senior CloudStack Developer, > >>> > >> SolidFire > >>> > >> >>>>> Inc.* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > e: > mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > Advancing the way the world > uses > >>> > the > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > cloud< > >>> > >> >>>>> > >> > >> > > http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > *™* > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > >> > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > -- > >>> > >> >>>>> > >> > >> > >> > > > >> > > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > >> > > *Senior CloudStack Developer, > >>> > SolidFire > >>> > >> Inc.* > >>> > >> >>>>> > >> > >> > >> > > > >> > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > >> > > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > >> > > Advancing the way the world > uses the > >>> > >> cloud< > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> http://solidfire.com/solution/overview/?video=play > >>> > >> >>>>> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > *™* > >>> > >> >>>>> > >> > >> > >> > > > >> > > > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > > >>> > >> >>>>> > >> > >> > >> > > > >> > -- > >>> > >> >>>>> > >> > >> > >> > > > >> > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > >> > *Senior CloudStack Developer, > >>> SolidFire > >>> > >> Inc.* > >>> > >> >>>>> > >> > >> > >> > > > >> > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > >> > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > >> > Advancing the way the world uses > the > >>> > >> >>>>> > >> > >> > >> > > > >> > cloud< > >>> > >> >>>>> > >> > http://solidfire.com/solution/overview/?video=play > >>> > >> >>>>> > >> > >> > >> > > > >> > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > -- > >>> > >> >>>>> > >> > >> > >> > > > > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > > *Senior CloudStack Developer, > SolidFire > >>> > Inc.* > >>> > >> >>>>> > >> > >> > >> > > > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > > Advancing the way the world uses the > >>> cloud< > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > >> > > > > *™* > >>> > >> >>>>> > >> > >> > >> > > > > > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > -- > >>> > >> >>>>> > >> > >> > >> > > > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > > > *Senior CloudStack Developer, SolidFire > >>> Inc.* > >>> > >> >>>>> > >> > >> > >> > > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > > > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > > > Advancing the way the world uses the > >>> > >> >>>>> > >> > >> > >> > > > cloud< > >>> > >> >>>>> > http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > >> > > > *™* > >>> > >> >>>>> > >> > >> > >> > > > > >>> > >> >>>>> > >> > >> > >> > > > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > -- > >>> > >> >>>>> > >> > >> > >> > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > >> > *Senior CloudStack Developer, SolidFire > Inc.* > >>> > >> >>>>> > >> > >> > >> > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > >> > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > >> > Advancing the way the world uses the > >>> > >> >>>>> > >> > >> > >> > cloud< > >>> > >> >>>>> http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > >> > *™* > >>> > >> >>>>> > >> > >> > >> > > >>> > >> >>>>> > >> > >> > >> > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > -- > >>> > >> >>>>> > >> > >> > > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > >> > >> > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > > Advancing the way the world uses the cloud< > >>> > >> >>>>> > >> > >> > > http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > > *™* > >>> > >> >>>>> > >> > >> > > > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > -- > >>> > >> >>>>> > >> > >> > *Mike Tutkowski* > >>> > >> >>>>> > >> > >> > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > >> > >> > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > >> > o: 303.746.7302 > >>> > >> >>>>> > >> > >> > Advancing the way the world uses the > >>> > >> >>>>> > >> > >> > cloud< > >>> > >> http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > >> > *™* > >>> > >> >>>>> > >> > >> > > >>> > >> >>>>> > >> > >> > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > -- > >>> > >> >>>>> > >> > > *Mike Tutkowski* > >>> > >> >>>>> > >> > > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > >> > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > > o: 303.746.7302 > >>> > >> >>>>> > >> > > Advancing the way the world uses the cloud< > >>> > >> >>>>> > >> > http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > >> > > *™* > >>> > >> >>>>> > >> > > > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > -- > >>> > >> >>>>> > >> > *Mike Tutkowski* > >>> > >> >>>>> > >> > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > >> > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > >> > o: 303.746.7302 > >>> > >> >>>>> > >> > Advancing the way the world uses the > >>> > >> >>>>> > >> > cloud< > http://solidfire.com/solution/overview/?video=play > >>> > > >>> > >> >>>>> > >> > *™* > >>> > >> >>>>> > >> > > >>> > >> >>>>> > >> > >>> > >> >>>>> > > > >>> > >> >>>>> > > > >>> > >> >>>>> > > > >>> > >> >>>>> > > -- > >>> > >> >>>>> > > *Mike Tutkowski* > >>> > >> >>>>> > > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > > o: 303.746.7302 > >>> > >> >>>>> > > Advancing the way the world uses the cloud< > >>> > >> >>>>> > http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > > *™* > >>> > >> >>>>> > > > >>> > >> >>>>> > > >>> > >> >>>>> > > >>> > >> >>>>> > > >>> > >> >>>>> > -- > >>> > >> >>>>> > *Mike Tutkowski* > >>> > >> >>>>> > *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>>> > e: mike.tutkow...@solidfire.com > >>> > >> >>>>> > o: 303.746.7302 > >>> > >> >>>>> > Advancing the way the world uses the > >>> > >> >>>>> > cloud<http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>>> > *™* > >>> > >> >>>>> > > >>> > >> >>>>> > >>> > >> >>>> > >>> > >> >>>> > >>> > >> >>>> > >>> > >> >>>> -- > >>> > >> >>>> *Mike Tutkowski* > >>> > >> >>>> *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>>> e: mike.tutkow...@solidfire.com > >>> > >> >>>> o: 303.746.7302 > >>> > >> >>>> Advancing the way the world uses the cloud< > >>> > >> http://solidfire.com/solution/overview/?video=play> > >>> > >> >>>> *™* > >>> > >> >>>> > >>> > >> >>> > >>> > >> >>> > >>> > >> >>> > >>> > >> >>> -- > >>> > >> >>> *Mike Tutkowski* > >>> > >> >>> *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >>> e: mike.tutkow...@solidfire.com > >>> > >> >>> o: 303.746.7302 > >>> > >> >>> Advancing the way the world uses the cloud< > >>> > >> http://solidfire.com/solution/overview/?video=play> > >>> > >> >>> *™* > >>> > >> >>> > >>> > >> >> > >>> > >> >> > >>> > >> >> > >>> > >> >> -- > >>> > >> >> *Mike Tutkowski* > >>> > >> >> *Senior CloudStack Developer, SolidFire Inc.* > >>> > >> >> e: mike.tutkow...@solidfire.com > >>> > >> >> o: 303.746.7302 > >>> > >> >> Advancing the way the world uses the > >>> > >> >> cloud<http://solidfire.com/solution/overview/?video=play> > >>> > >> >> *™* > >>> > >> > >>> > > > >>> > > > >>> > > > >>> > > -- > >>> > > *Mike Tutkowski* > >>> > > *Senior CloudStack Developer, SolidFire Inc.* > >>> > > e: mike.tutkow...@solidfire.com > >>> > > o: 303.746.7302 > >>> > > Advancing the way the world uses the cloud< > >>> > http://solidfire.com/solution/overview/?video=play> > >>> > > *™* > >>> > > > >>> > > >>> > > >>> > > >>> > -- > >>> > *Mike Tutkowski* > >>> > *Senior CloudStack Developer, SolidFire Inc.* > >>> > e: mike.tutkow...@solidfire.com > >>> > o: 303.746.7302 > >>> > Advancing the way the world uses the > >>> > cloud<http://solidfire.com/solution/overview/?video=play> > >>> > *™* > >>> > > >>> > >> > >> > >> > >> -- > >> *Mike Tutkowski* > >> *Senior CloudStack Developer, SolidFire Inc.* > >> e: mike.tutkow...@solidfire.com > >> o: 303.746.7302 > >> Advancing the way the world uses the > >> cloud<http://solidfire.com/solution/overview/?video=play> > >> *™* > -- *Mike Tutkowski* *Senior CloudStack Developer, SolidFire Inc.* e: mike.tutkow...@solidfire.com o: 303.746.7302 Advancing the way the world uses the cloud<http://solidfire.com/solution/overview/?video=play> *™*
