Haven't done too much with Ubuntu yet, but with centos you can build and install the packages, OR you can do the mvn, but the mvn developer project only does the mgmt server portion, you still need to install the agent packages on your host. This is why I find it easiest to just build packages and install them when developing KVM.
With centos you just build the packages independently of compiling (it copies the source, compiles it, packages it). It WOULD be redundant for Centos. This is nice because you can work on the code, check out another branch, etc while the packages are compiling and building. I'm not sure if the Debian packaging requires you to compile first. The dollar sign is probably just an indicator of the CLI prompt, and probably should have been on the mvn command as well. On Sep 10, 2013 12:23 PM, "Mike Tutkowski" <mike.tutkow...@solidfire.com> wrote: > Hey Marcus, > > Figured I'd follow up on this. > > I have KVM running in an Ubuntu 12.04.1 VM under VMware Fusion now > (although not added into CS just yet). > > I set up two adapters for the VM: 1) Uses NAT (so I can access the > internet) and 2) Uses a host-only network (which is the same network the > VMs KVM spins up will reside on). > > This is how I set up my /etc/network/interfaces file: > > auto lo > iface lo inet loopback > > # The primary network interface > auto eth0 > iface eth0 inet manual > > # Bridge 0 > auto cloudbr0 > iface cloudbr0 inet static > address 192.168.233.10 > netmask 255.255.255.0 > network 192.168.233.0 > broadcast 192.168.233.255 > dns-nameservers 8.8.8.8 > bridge_ports eth0 > bridge_fd 5 > bridge_stp off > bridge_maxwait 1 > post-up route add default gw 192.168.233.2 metric 1 > pre-down route del default gw 192.168.233.2 > > auto eth1 > iface eth1 inet static > address 192.168.196.10 > netmask 255.255.255.0 > network 192.168.196.0 > broadcast 192.168.196.255 > dns-nameservers 192.168.196.1 > bridge_ports eth1 > bridge_fd 5 > bridge_stp off > bridge_maxwait 1 > post-up route add default gw 192.168.196.1 metric 2 > pre-down route del default gw 192.168.196.1 > > I've built the DEB packages, but have a quick question about the > directions found here: > > > http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/sect-source-builddebs.html > > ********** > > Now that we have resolved the dependencies we can move on to building > CloudStack and packaging them into DEBs. > > > mvn clean install -P developer,systemvm > $ dpkg-buildpackage -uc -us > > > ********** > > The mvn command isn't preceded by a $, so I was wondering if the > directions are implying that by running dpkg-buildpackage -uc -us that the > command above automatically gets run as part of the process. > > When I built the DEB packages, I actually ran the mvn command and then > followed it up by the dpkg-buildpackage one, but wasn't sure if that was > necessary to do or redundant. > > Thanks! > > > On Fri, Aug 30, 2013 at 7:45 AM, Marcus Sorensen <shadow...@gmail.com>wrote: > >> I'm not sure if you are developing or just trying to get a system running. >> If the latter, you should be using the same repo and deb packages for both >> the mgt server and agent, such that everything can be installed via >> 'apt-get install', which is hopefully covered in the docs. >> >> If you are developing, I'd generate the .debs, copy agent and common >> packages over, install those, and then if agent code changes during >> development you can either do that again, or manually replace the affected >> jars/scripts and restart the agent. >> >> As far as I'm aware the agent needs to run with root permissions on the >> box. It sounds like you need to fix ssh as a prerequisite before beginning >> setup. As mentioned it might be the PermitRootLogin option. >> On Aug 29, 2013 11:22 PM, "Mike Tutkowski" <mike.tutkow...@solidfire.com> >> wrote: >> >> > I figured out how to assign a password to root on Ubuntu, but that >> didn't >> > solve the problem. >> > >> > As I thought about it more, I'm actually running the 4.2 CSMS, but the >> 4.1 >> > version of the agent code on the KVM host. >> > >> > I'm not sure how to deploy the newest agent code from the 4.2 branch to >> the >> > KVM host, though. Would you be able to tell me how to do that, Marcus? >> > >> > Is there any Java code of ours on the KVM host or is it all in the form >> of >> > scripts? >> > >> > Thanks! >> > >> > >> > On Thu, Aug 29, 2013 at 10:30 PM, Mike Tutkowski < >> > mike.tutkow...@solidfire.com> wrote: >> > >> > > Yeah, I wanted to use root, but got the following when trying to SSH >> in: >> > > >> > > mtutkowski-LT:~ mtutkowski$ ssh root@172.16.140.5 >> > > root@172.16.140.5's password: >> > > Permission denied, please try again. >> > > >> > > >> > > On Thu, Aug 29, 2013 at 10:28 PM, Marcus Sorensen < >> shadow...@gmail.com >> > >wrote: >> > > >> > >> I've only ever seen it work with root. Do the docs say otherwise? >> Maybe >> > >> your user credentials will work if you have it set with sudo >> privileges >> > >> and >> > >> privileges to libvirtd. >> > >> On Aug 29, 2013 10:25 PM, "Mike Tutkowski" < >> > mike.tutkow...@solidfire.com> >> > >> wrote: >> > >> >> > >> > By the way, I've been supplying the username I log into Ubuntu >> with: >> > >> > mtutkowski (not root). I think that's correct for Ubuntu. >> > >> > >> > >> > After the script executes, I get the following back in the CSMS >> log: >> > >> > >> > >> > { Ans: , MgmtId: 1, via: 2, Ver: v1, Flags: 100010, >> > >> > >> [{"com.cloud.agent.api.AgentControlAnswer":{"result":true,"wait":0}}] >> > } >> > >> > >> > >> > >> > >> > On Thu, Aug 29, 2013 at 10:20 PM, Mike Tutkowski < >> > >> > mike.tutkow...@solidfire.com> wrote: >> > >> > >> > >> > > I don't see a process by either name in System Monitor. >> > >> > > >> > >> > > Is that SSH call supposed to have started such a process running? >> > >> > > >> > >> > > >> > >> > > On Thu, Aug 29, 2013 at 10:15 PM, Marcus Sorensen < >> > >> shadow...@gmail.com >> > >> > >wrote: >> > >> > > >> > >> > >> Is the agent running? Or perhaps cloud-setup-agent? >> > >> > >> On Aug 29, 2013 10:13 PM, "Mike Tutkowski" < >> > >> > mike.tutkow...@solidfire.com> >> > >> > >> wrote: >> > >> > >> >> > >> > >> > Interesting...there is an agent folder, but no files in it. >> > >> > >> > >> > >> > >> > >> > >> > >> > On Thu, Aug 29, 2013 at 10:10 PM, Mike Tutkowski < >> > >> > >> > mike.tutkow...@solidfire.com> wrote: >> > >> > >> > >> > >> > >> > > Thanks! >> > >> > >> > > >> > >> > >> > > By the way, these are the parameters I pass into >> > >> > >> cloudstack-setup-agent >> > >> > >> > > (just in case something looks odd to you there): >> > >> > >> > > >> > >> > >> > > -m 172.16.140.1 -z 1 -p 1 -c 3 -g >> > >> > >> 8bd34de8-783c-387f-a043-aa53ee31df6b -a >> > >> > >> > > --pubNic=cloudbr0 --prvNic=cloudbr0 --guestNic=cloudbr0 >> > >> > >> > > >> > >> > >> > > >> > >> > >> > > On Thu, Aug 29, 2013 at 10:07 PM, Marcus Sorensen < >> > >> > >> shadow...@gmail.com >> > >> > >> > >wrote: >> > >> > >> > > >> > >> > >> > >> /var/log/cloudstack/agent/agent.log ... There is also a >> setup >> > >> log >> > >> > in >> > >> > >> > that >> > >> > >> > >> location to see if something in the agent setup went awry. >> > >> > >> > >> On Aug 29, 2013 10:05 PM, "Mike Tutkowski" < >> > >> > >> > mike.tutkow...@solidfire.com> >> > >> > >> > >> wrote: >> > >> > >> > >> >> > >> > >> > >> > Thanks, Marcus >> > >> > >> > >> > >> > >> > >> > >> > I'm not used to playing around in a KVM environment. Can >> you >> > >> tell >> > >> > >> me >> > >> > >> > >> where >> > >> > >> > >> > our agent logs are on KVM? >> > >> > >> > >> > >> > >> > >> > >> > Originally I didn't have SSH installed, but I noticed >> that >> > >> > problem >> > >> > >> > while >> > >> > >> > >> > stepping through the debugger. After I installed it, the >> SSH >> > >> call >> > >> > >> went >> > >> > >> > >> > through just fine as far as the CSMS was concerned, so - >> as >> > >> you >> > >> > >> say - >> > >> > >> > I >> > >> > >> > >> was >> > >> > >> > >> > thinking I should take a look on the KVM side and see if >> > >> maybe an >> > >> > >> > error >> > >> > >> > >> > occurred that it didn't report back. >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > On Thu, Aug 29, 2013 at 9:57 PM, Marcus Sorensen < >> > >> > >> shadow...@gmail.com >> > >> > >> > >> > >wrote: >> > >> > >> > >> > >> > >> > >> > >> > > Normally the agent service starts and connects up. The >> > mgmt >> > >> > >> server >> > >> > >> > >> uses >> > >> > >> > >> > ssh >> > >> > >> > >> > > to start the agent and set it up for the first time. >> You >> > >> will >> > >> > >> > probably >> > >> > >> > >> > need >> > >> > >> > >> > > to look at the agent logs and see if it is having >> trouble >> > >> > >> connecting >> > >> > >> > >> to >> > >> > >> > >> > the >> > >> > >> > >> > > mgmt server or something (firewall?). >> > >> > >> > >> > > On Aug 29, 2013 9:55 PM, "Mike Tutkowski" < >> > >> > >> > >> mike.tutkow...@solidfire.com> >> > >> > >> > >> > > wrote: >> > >> > >> > >> > > >> > >> > >> > >> > > > So, now I'm trying to add a KVM host to CS and am >> > having a >> > >> > bit >> > >> > >> of >> > >> > >> > >> > trouble >> > >> > >> > >> > > > with LibvirtServerDiscoverer finding it (this line >> > below: >> > >> > >> > >> List<HostVO> >> > >> > >> > >> > > > hosts = >> > >> > >> _resourceMgr.listAllUpAndEnabledHosts(Host.Type.Routing, >> > >> > >> > >> > > clusterId, >> > >> > >> > >> > > > podId, dcId);). >> > >> > >> > >> > > > >> > >> > >> > >> > > > private HostVO waitForHostConnect(long dcId, long >> > >> podId, >> > >> > >> > >> > > > longclusterId, String guid) { >> > >> > >> > >> > > > >> > >> > >> > >> > > > for (int i = 0; i < _waitTime * 2; i++) { >> > >> > >> > >> > > > >> > >> > >> > >> > > > List<HostVO> hosts = _resourceMgr >> > >> > >> > >> > > > .listAllUpAndEnabledHosts(Host.Type.Routing, >> clusterId, >> > >> > podId, >> > >> > >> > >> dcId); >> > >> > >> > >> > > > >> > >> > >> > >> > > > for (HostVO host : hosts) { >> > >> > >> > >> > > > >> > >> > >> > >> > > > if >> > >> (host.getGuid().equalsIgnoreCase(guid)) { >> > >> > >> > >> > > > >> > >> > >> > >> > > > return host; >> > >> > >> > >> > > > >> > >> > >> > >> > > > } >> > >> > >> > >> > > > >> > >> > >> > >> > > > } >> > >> > >> > >> > > > Any thoughts on how I might debug this? Is there a >> log >> > on >> > >> the >> > >> > >> KVM >> > >> > >> > >> host >> > >> > >> > >> > I >> > >> > >> > >> > > > should be looking at? I don't see a relevant entry >> in my >> > >> > >> > cloud.host >> > >> > >> > >> > > table. >> > >> > >> > >> > > > >> > >> > >> > >> > > > Thanks! >> > >> > >> > >> > > > >> > >> > >> > >> > > > >> > >> > >> > >> > > > On Thu, Aug 29, 2013 at 7:56 PM, Mike Tutkowski < >> > >> > >> > >> > > > mike.tutkow...@solidfire.com> wrote: >> > >> > >> > >> > > > >> > >> > >> > >> > > > > Thanks, Marty - that solved the problem! >> > >> > >> > >> > > > > >> > >> > >> > >> > > > > >> > >> > >> > >> > > > > On Thu, Aug 29, 2013 at 4:56 PM, Marty Sweet < >> > >> > >> > >> msweet....@gmail.com> >> > >> > >> > >> > > > wrote: >> > >> > >> > >> > > > > >> > >> > >> > >> > > > >> Hi Mike, >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > >> Something like this should help: >> > >> > >> > >> > > > >> >> > >> > >> > >> http://en.kioskea.net/faq/809-debian-apt-get-no-pubkey-gpg-error >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > >> Marty >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > >> On Thursday, August 29, 2013, Mike Tutkowski >> wrote: >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > >> > Any thoughts on this, Wei? >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > W: GPG error: http://cloudstack.apt-get.euprecise >> > >> > >> Release: >> > >> > >> > >> The >> > >> > >> > >> > > > >> following >> > >> > >> > >> > > > >> > signatures couldn't be verified because the >> public >> > >> key >> > >> > is >> > >> > >> not >> > >> > >> > >> > > > available: >> > >> > >> > >> > > > >> > NO_PUBKEY BBFCFE5386C278E3 >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > On Thu, Aug 29, 2013 at 4:21 PM, Mike Tutkowski >> < >> > >> > >> > >> > > > >> > mike.tutkow...@solidfire.com> wrote: >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > > Thanks for the repo info, Wei! >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > > On Thu, Aug 29, 2013 at 4:19 PM, Wei ZHOU < >> > >> > >> > >> > ustcweiz...@gmail.com> >> > >> > >> > >> > > > >> wrote: >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > >> You need to add a repo, or download the deb >> > files >> > >> and >> > >> > >> > >> install >> > >> > >> > >> > > them. >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > >> for CentOS/RHEL, >> > >> > >> http://cloudstack.apt-get.eu/rhel/4.1/ >> > >> > >> > >> > > > >> > >> for Ubuntu, >> > >> > >> > >> > > > >> >> > >> > http://cloudstack.apt-get.eu/ubuntu/dists/precise/4.1/pool/ >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > >> 2013/8/29 Mike Tutkowski < >> > >> > mike.tutkow...@solidfire.com >> > >> > >> > >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > >> > Maybe I need to add a repo for CloudStack? >> I >> > >> didn't >> > >> > >> see >> > >> > >> > >> that >> > >> > >> > >> > in >> > >> > >> > >> > > > the >> > >> > >> > >> > > > >> > KVM >> > >> > >> > >> > > > >> > >> > section, but perhaps it was earlier in the >> > >> > >> > documentation. >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > On Thu, Aug 29, 2013 at 3:35 PM, Mike >> > Tutkowski >> > >> < >> > >> > >> > >> > > > >> > >> > mike.tutkow...@solidfire.com> wrote: >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > > Hi, >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > For the past nine months that I've been >> > >> working >> > >> > >> with >> > >> > >> > >> > > > CloudStack, >> > >> > >> > >> > > > >> > I've >> > >> > >> > >> > > > >> > >> > > exclusively used XenServer and ESXi as my >> > >> hosts. >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > I am now trying out KVM and following the >> > >> > >> instruction >> > >> > >> > >> here: >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > >> > >> > >> > >> > > >> > >> > >> > >> > >> > >> > >> > >> >> > >> > >> > >> > >> > >> >> > >> > >> > >> >> > >> http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/hypervisor-kvm-install-flow.html >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > I am unable to install the >> cloudstack-agent >> > >> > >> package on >> > >> > >> > >> my >> > >> > >> > >> > KVM >> > >> > >> > >> > > > >> host >> > >> > >> > >> > > > >> > >> > (Ubuntu >> > >> > >> > >> > > > >> > >> > > 12.04.1), however. >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > mtutkowski@ubuntu:~$ sudo apt-get >> install >> > >> > >> > >> cloudstack-agent >> > >> > >> > >> > > > >> > >> > > Reading package lists... Done >> > >> > >> > >> > > > >> > >> > > Building dependency tree >> > >> > >> > >> > > > >> > >> > > Reading state information... Done >> > >> > >> > >> > > > >> > >> > > E: Unable to locate package >> cloudstack-agent >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > Any thoughts on this? >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > Thanks! >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > > -- >> > >> > >> > >> > > > >> > >> > > *Mike Tutkowski* >> > >> > >> > >> > > > >> > >> > > *Senior CloudStack Developer, SolidFire >> > Inc.* >> > >> > >> > >> > > > >> > >> > > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > >> > >> > > o: 303.746.7302 >> > >> > >> > >> > > > >> > >> > > Advancing the way the world uses the >> cloud< >> > >> > >> > >> > > > >> > >> > >> > >> http://solidfire.com/solution/overview/?video=play >> > >> > > >> > >> > >> > >> > > > >> > >> > > *™* >> > >> > >> > >> > > > >> > >> > > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> > -- >> > >> > >> > >> > > > >> > >> > *Mike Tutkowski* >> > >> > >> > >> > > > >> > >> > *Senior CloudStack Developer, SolidFire >> Inc.* >> > >> > >> > >> > > > >> > >> > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > >> > >> > o: 303.746.7302 >> > >> > >> > >> > > > >> > >> > Advancing the way the world uses the >> > >> > >> > >> > > > >> > >> > cloud< >> > >> > >> > http://solidfire.com/solution/overview/?video=play> >> > >> > >> > >> > > > >> > >> > *™* >> > >> > >> > >> > > > >> > >> > >> > >> > >> > >> > > > >> > >> >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > > -- >> > >> > >> > >> > > > >> > > *Mike Tutkowski* >> > >> > >> > >> > > > >> > > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > >> > > > >> > > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > >> > > o: 303.746.7302 >> > >> > >> > >> > > > >> > > Advancing the way the world uses the cloud< >> > >> > >> > >> > > > >> > >> http://solidfire.com/solution/overview/?video=play >> > > >> > >> > >> > >> > > > >> > > *™* >> > >> > >> > >> > > > >> > > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > >> > >> > >> > >> > > > >> > -- >> > >> > >> > >> > > > >> > *Mike Tutkowski* >> > >> > >> > >> > > > >> > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > >> > > > >> > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > >> > o: 303.746.7302 >> > >> > >> > >> > > > >> > Advancing the way the world uses the >> > >> > >> > >> > > > >> > cloud< >> > >> > http://solidfire.com/solution/overview/?video=play >> > >> > >> > >> > > > >> >> > >> > >> > >> > > > > >> > >> > >> > >> > > > > >> > >> > >> > >> > > > > >> > >> > >> > >> > > > > -- >> > >> > >> > >> > > > > *Mike Tutkowski* >> > >> > >> > >> > > > > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > >> > > > > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > > o: 303.746.7302 >> > >> > >> > >> > > > > Advancing the way the world uses the cloud< >> > >> > >> > >> > > > http://solidfire.com/solution/overview/?video=play> >> > >> > >> > >> > > > > *™* >> > >> > >> > >> > > > > >> > >> > >> > >> > > > >> > >> > >> > >> > > > >> > >> > >> > >> > > > >> > >> > >> > >> > > > -- >> > >> > >> > >> > > > *Mike Tutkowski* >> > >> > >> > >> > > > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > >> > > > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > > > o: 303.746.7302 >> > >> > >> > >> > > > Advancing the way the world uses the >> > >> > >> > >> > > > cloud< >> > http://solidfire.com/solution/overview/?video=play> >> > >> > >> > >> > > > *™* >> > >> > >> > >> > > > >> > >> > >> > >> > > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > -- >> > >> > >> > >> > *Mike Tutkowski* >> > >> > >> > >> > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > >> > e: mike.tutkow...@solidfire.com >> > >> > >> > >> > o: 303.746.7302 >> > >> > >> > >> > Advancing the way the world uses the >> > >> > >> > >> > cloud<http://solidfire.com/solution/overview/?video=play >> > >> > >> > >> > >> > *™* >> > >> > >> > >> > >> > >> > >> > >> >> > >> > >> > > >> > >> > >> > > >> > >> > >> > > >> > >> > >> > > -- >> > >> > >> > > *Mike Tutkowski* >> > >> > >> > > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > > e: mike.tutkow...@solidfire.com >> > >> > >> > > o: 303.746.7302 >> > >> > >> > > Advancing the way the world uses the cloud< >> > >> > >> > http://solidfire.com/solution/overview/?video=play> >> > >> > >> > > *™* >> > >> > >> > > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > -- >> > >> > >> > *Mike Tutkowski* >> > >> > >> > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > >> > e: mike.tutkow...@solidfire.com >> > >> > >> > o: 303.746.7302 >> > >> > >> > Advancing the way the world uses the >> > >> > >> > cloud<http://solidfire.com/solution/overview/?video=play> >> > >> > >> > *™* >> > >> > >> > >> > >> > >> >> > >> > > >> > >> > > >> > >> > > >> > >> > > -- >> > >> > > *Mike Tutkowski* >> > >> > > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > > e: mike.tutkow...@solidfire.com >> > >> > > o: 303.746.7302 >> > >> > > Advancing the way the world uses the cloud< >> > >> > http://solidfire.com/solution/overview/?video=play> >> > >> > > *™* >> > >> > > >> > >> > >> > >> > >> > >> > >> > >> > -- >> > >> > *Mike Tutkowski* >> > >> > *Senior CloudStack Developer, SolidFire Inc.* >> > >> > e: mike.tutkow...@solidfire.com >> > >> > o: 303.746.7302 >> > >> > Advancing the way the world uses the >> > >> > cloud<http://solidfire.com/solution/overview/?video=play> >> > >> > *™* >> > >> > >> > >> >> > > >> > > >> > > >> > > -- >> > > *Mike Tutkowski* >> > > *Senior CloudStack Developer, SolidFire Inc.* >> > > e: mike.tutkow...@solidfire.com >> > > o: 303.746.7302 >> > > Advancing the way the world uses the cloud< >> > http://solidfire.com/solution/overview/?video=play> >> > > *™* >> > > >> > >> > >> > >> > -- >> > *Mike Tutkowski* >> > *Senior CloudStack Developer, SolidFire Inc.* >> > e: mike.tutkow...@solidfire.com >> > o: 303.746.7302 >> > Advancing the way the world uses the >> > cloud<http://solidfire.com/solution/overview/?video=play> >> > *™* >> > >> > > > > -- > *Mike Tutkowski* > *Senior CloudStack Developer, SolidFire Inc.* > e: mike.tutkow...@solidfire.com > o: 303.746.7302 > Advancing the way the world uses the > cloud<http://solidfire.com/solution/overview/?video=play> > *™* >
