On Fri, Mar 3, 2023 at 10:46 AM Albretch Mueller <lbrt...@gmail.com> wrote:
> $ sudo lspci | grep --ignore-case Wireless > 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless > Network Adapter (rev 31) > $ > > $ sudo lshw -class network > *-network DISABLED > description: Ethernet interface > product: RTL810xE PCI Express Fast Ethernet controller > vendor: Realtek Semiconductor Co., Ltd. > physical id: 0 > bus info: pci@0000:01:00.0 > logical name: enp1s0 > version: 07 > serial: c0:3e:ba:26:aa:93 > width: 64 bits > clock: 33MHz > capabilities: pm msi pciexpress msix vpd cap_list ethernet physical > configuration: broadcast=yes driver=r8169 > driverversion=5.10.0-18-amd64 latency=0 link=no multicast=yes > resources: irq:16 ioport:3000(size=256) > memory:91400000-91400fff memory:91200000-91203fff > *-network > description: Network controller > product: QCA9377 802.11ac Wireless Network Adapter > vendor: Qualcomm Atheros > physical id: 0 > bus info: pci@0000:02:00.0 > version: 31 > width: 64 bits > clock: 33MHz > capabilities: pm msi pciexpress bus_master cap_list > configuration: driver=ath10k_pci latency=0 > resources: irq:127 memory:91000000-911fffff > $ > > The difference between the wired Ethernet controller and the Wireless > Network Adapter are obvious, but what is the "logical name" of the > internal wireless card, which as I read: > Just run `ip link` or `ip address` and it will show you the name. > https://forums.debian.net/viewtopic.php?t=136212 > > is supported in the kernel since version 4.4? > > How can you go: "ip link set dev <logical name for wireless adapter> > up" when I don't even see what the logical name is? > > -- ⢀⣴⠾⠻⢶⣦⠀ ⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system ⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org/ ⠈⠳⣄⠀⠀
