On 4/11/20, riveravaldez <riveravaldezm...@gmail.com> wrote: > Hi, > > I would like to know what's the proper way to solve this. I'm on an > updated debian-testing installation (with pulseaudio installed and > working, but the problem seems to be previous, i.e., in ALSA, because > pavucontrol doesn't show the soundcard in its correspondent tab). > > I can get audio from audacity and audacious as long as I choose > manually the proper soundcard in its options, but not from other > programs (e.g., firefox, mplayer, etc.), which I suppose use the > default soundcard. > > Strangely, 'speaker-test -c2' doesn't produce a sound. But 'sudo > speaker-test -c2' works flawlessly. (The idea to check that came from > [1].) > > I already tested (following [2]): > > $ sudo alsactl init > Found hardware: "HDA-Intel" "Conexant CX20590" > "HDA:14f1506e,17aa21db,00100003 HDA:80862805,80860101,00100000" > "0x17aa" "0x21db" > Hardware is initialized using a generic method > > But nothing changed after reboot. (Though, the CX20590 is the working > choice for audacious/audacity.) > > I have this info: > > $ cat /proc/asound/cards > 0 [PCH ]: HDA-Intel - HDA Intel PCH > HDA Intel PCH at 0xf2520000 irq 35 > > $ lspci -v > 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset > Family High Definition Audio Controller (rev 04) > Subsystem: Lenovo 6 Series/C200 Series Chipset Family High Definition > Audio Controller > Flags: bus master, fast devsel, latency 0, IRQ 35 > Memory at f2520000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > > Any other info I could provide? > What should I do? > > BTW, JACK also fails to work, with these messages: > > 20:59:14.349 Reiniciar estadísticas. > 20:59:14.356 Cambios en las conexiones ALSA. > Cannot connect to server socket err = No existe el fichero o el directorio > Cannot connect to server request channel > jack server is not running or cannot be started > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > 20:59:31.365 JACK está iniciándose... > 20:59:31.366 /usr/bin/jackd -v -dalsa -r48000 -p512 -n2 -Xseq -D > -Chw:PCH,0 -Phw:PCH,0 > Cannot connect to server socket err = No existe el fichero o el directorio > Cannot connect to server request channel > jack server is not running or cannot be started > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > 20:59:31.382 JACK se inició con PID=3144. > no message buffer overruns > no message buffer overruns > no message buffer overruns > jackdmp 1.9.12 > Copyright 2001-2005 Paul Davis and others. > Copyright 2004-2016 Grame. > Copyright 2016-2017 Filipe Coelho. > jackdmp comes with ABSOLUTELY NO WARRANTY > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details > JACK server starting in realtime mode with priority 10 > self-connect-mode is "Don't restrict self connect requests" > Jack: JackPosixThread::StartImp : create non RT thread > Jack: JackPosixThread::ThreadHandler : start > Jack: capture device hw:PCH,0 > Jack: playback device hw:PCH,0 > Jack: apparent rate = 48000 > Jack: frames per period = 512 > Jack: JackDriver::Open capture_driver_name = hw:PCH,0 > Jack: JackDriver::Open playback_driver_name = hw:PCH,0 > Jack: Check protocol client = 8 server = 8 > Jack: JackEngine::ClientInternalOpen: name = system > Jack: JackEngine::AllocateRefNum ref = 0 > Jack: JackLinuxFutex::Allocate name = jack_sem.1000_default_system val = 0 > Jack: JackEngine::NotifyAddClient: name = system > Jack: JackGraphManager::SetBufferSize size = 512 > Jack: JackConnectionManager::DirectConnect first: ref1 = 0 ref2 = 0 > Jack: JackGraphManager::ConnectRefNum cur_index = 0 ref1 = 0 ref2 = 0 > Jack: JackDriver::SetupDriverSync driver sem in flush mode > audio_reservation_init > Acquire audio card Audio0 > creating alsa driver ... > hw:PCH,0|hw:PCH,0|512|2|48000|0|0|nomon|swmeter|-|32bit > ATTENTION: The playback device "hw:PCH,0" is already in use. Please > stop the application using it and run JACK again > Jack: JackDriver::Close > Jack: JackConnectionManager::DirectDisconnect last: ref1 = 0 ref2 = 0 > Jack: JackGraphManager::DisconnectRefNum cur_index = 0 ref1 = 0 ref2 = 0 > Jack: JackEngine::ClientInternalClose ref = 0 > Jack: JackEngine::ClientCloseAux ref = 0 > Jack: JackGraphManager::RemoveAllPorts ref = 0 > Released audio card Audio0 > audio_reservation_finish > Jack: ~JackDriver > Cannot initialize driver > Jack: no message buffer overruns > Jack: JackPosixThread::Stop > Jack: JackPosixThread::ThreadHandler : exit > JackServer::Open failed with -1 > Jack: Succeeded in unlocking 82280346 byte memory area > Jack: JackShmMem::delete size = 0 index = 0 > Jack: ~JackDriver > Jack: Succeeded in unlocking 1187 byte memory area > Jack: JackShmMem::delete size = 0 index = 1 > Jack: Cleaning up shared memory > Jack: Cleaning up files > Jack: Unregistering server `default' > Failed to open server > 20:59:31.602 JACK ha sido detenido > 20:59:33.455 No puede conectarse al servidor JACK como cliente. - La > operación global falló. - No puede conectarse al servidor. Por favor > revise la ventana de mensajes para mas información. > Cannot connect to server socket err = No existe el fichero o el directorio > Cannot connect to server request channel > jack server is not running or cannot be started > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, > skipping unlock > > Thanks a lot! > > [1] http://forums.debian.net/viewtopic.php?f=6&t=39116#p246951 > [2] https://wiki.debian.org/ALSA#Loading_modules >
I guess I should have added: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 Thanks a lot in advance.
