On Tuesday 15 May 2007 07:20, Florian Kulzer wrote:
> > iface etho inet static
>
> ^
> I am not sure if this is the root of the problem but it cannot hurt to
> correct it.
Hi Florian:
I typed 'etho' instead of 'eth0', but it *is* 'eth0' in the script.
> > address 192.168.1.3
> > netmask 255.255.255.0
> > network 192.168.1.0
> > broadcast 192.168.1.255
> > gateway 191.168.1.1
> > dns-nameservers 12.6.42.1 12.6.42.2
> > dns-search johnson.com
> > ## end intefaces
>
> I had a look at the dmesg output which you linked in your original
> message. I saw that you also have references to "tulip0" in there. How
> many network interface cards are in that computer? (see "lspci")
Just one now.
line below:
##
01:05.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 31)
##
> Do you
> see anything interesting at the end of /var/log/syslog after you lose
> your connection?
I will look.
regards/thanks
tim
--
Tim Johnson <[EMAIL PROTECTED]>
Palmer, Alaska, USA
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
