Raffaele Morelli wrote:
LAP:~# artsd stop
Link points to "/tmp/ksocket-root"
can't create mcop directory
>
I usually kill artsd
I tried:
LAP:/# kill artsd
-su: kill: artsd: arguments must be process or job IDs
LAP:~# /etc/alsa reload
-su: /etc/alsa: is a directory
sorry, it was /etc/init.d/alsa reload
LAP:/# /etc/init.d/alsa reload
Unloading ALSA sound driver modules: snd-opl3sa2 snd-opl3-lib snd-hwdep
snd-cs4231-lib snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc
snd-mpu401-uart snd-seq-dummy snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-timer snd-rawmidi snd-seq-device.
Loading ALSA sound driver modules: snd-opl3sa2 snd-opl3-lib snd-hwdep
snd-cs4231-lib snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc
snd-mpu401-uart snd-seq-dummy snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-timer snd-rawmidi snd-seq-device.
----------------
Snip.
----------------
<http://www.alsa-project.org/alsa-doc/alsa-howto/x1298.htm>.
ah...
I read from this page:
This module does not support auto probe (if ISA PnP is not used) thus
all ports must be specified!!!
Not 100% sure, but probably isa-pnp kernel module is needed for this
card to be properly configured.
grep isa-pnp /etc/modules
if #isa-pnp line appears I suggest you to uncomment it and reboot.
No isa-pnp line in /etc/modules.
However, I did find:
LAP:/# find -iname isa
./sys/bus/isa
./sys/devices/isa
./usr/src/linux-headers-2.6.18-4/sound/isa
./usr/src/linux-headers-2.6.18-4-686/include/config/isa
./usr/src/linux-headers-2.6.18-4-686/include/config/generic/isa
./lib/modules/2.6.18-3-686/kernel/sound/isa
./lib/modules/2.6.18-4-686/kernel/sound/isa
LAP:/# find -iname isa-pnp
LAP:/#
I am using kernel 2.6.18-4-686.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
