On Sunday 21 August 2005 18:10, Csanyi Pal wrote:
> On Sun, Aug 21, 2005 at 06:24:34PM +0200, Alexander Schmehl wrote:
> > * Csanyi Pal <[EMAIL PROTECTED]> [050821 17:18]:
> > > I have the monitor PC2000 F17 69T.
> > > It was given to me yesterday, but without the manual.
> > > I need the technical informations bellow to set up my X Window:
> >
> > [..]
> >
> > > Has anybody these informations? If so, please tell me! Thanks!
> >
> > Take a look at read-edid [1], which might find that information for you.
>
> sudo get-edid
> get-edid: get-edid version 1.4.1
>
> Performing real mode VBE call
> Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
> Function supported
> Call successful
>
> VBE version 300
> VBE string at 0x11110 "Brookdale-G Graphics Chip Accelerated VGA BIOS"
>
> VBE/DDC service about to be called
> Report DDC capabilities
>
> Performing real mode VBE call
> Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
> Function supported
> Call successful
>
> Monitor and video card combination does not support DDC1 transfers
> Monitor and video card combination does not support DDC2 transfers
> 0 seconds per 128 byte EDID block transfer
> Screen is not blanked during DDC transfer
>
> Reading next EDID block
>
> VBE/DDC service about to be called
> Read EDID
>
> Performing real mode VBE call
> Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
> Function supported
> Call failed
>
> The EDID data should not be trusted as the VBE call failed
> Error: output block unchanged
>
> Thank you Alexander, but as You see abowe, I can't get the wanted
> informations.
>
> --
> Regards,
> Paul
> Debian Junior Project, DebianEdu, Moodle -> :-) :-) :-) :-) :-) :-) :-)
> http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.)
Hello Paul
Run the command " get-edid > filename "
Then " parse-edid < filename "
all the best,
from peter colton
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
