On Sun, Aug 21, 2005 at 03:04:46PM -0400, Kevin Carney wrote: > Sorry to hear that read-edid did not work for you. > Perhaps PC2000 is not the manufacturer. I seem to remember a monitor
Yes, You are right! I have a look at the backside of the monitor and there see the manufacturers name: KAGA ELECTRONICS CO., LTD. > Other than that, I found: > <http://www.si87.com/MonitorSolutions/kaga/fi769mt.html>, > <http://www.si87.com/MonitorSolutions/pc2000/f1785t.html>, > <http://www.forum.linux-sevenler.org/index.php/topic,866.0.html>, > Which may be close enough. Thanks! http://www.monitorworld.com/Monitors/kaga/fi769mt.html > Also, if it is a 17" monitor (which I suspect it is), then you can't go > wrong with the settings: > Horz 35-60 > Vert 55-90 Yes, it is a 17" monitor. > These are VERY conservitive settings; you could probably go as high as > 30-65,50-100 without worry. Okay, my .videogen is: mode 1024x768 nvidia off max_dotclk=68 # Monitors maximum dot rate. max_hfreq=69; max_vfreq=120 videogen generate now this: Modeline "1024x768" 68.00 1024 1056 1088 1312 768 770 773 808 # 68 \ MHz, 51.8 kHz, 64.1 Hz May I increase the max_dotclk slowly to get the 85 Hz vertical refresh rate? Because I have the dual boot system (Debian Sarge and Windows 2000) I get in the Windows system these settings: 1024x768 68.6 kHz 85 Hz (Mode 01 - I dont know what is it mean.) -- Regards, Paul Debian Junior Project, DebianEdu, Moodle -> :-) :-) :-) :-) :-) :-) :-) http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
