On Sat, Aug 13, 2005 at 07:59:17PM +0200, Bob Vloon wrote: > Hi, > > AR> I'm having some issues with my usb system in my fresh sarge > AR> installation, the scanner's are permission issues, > > When looking in /proc/bus/usb, if found that my scanner is owned by > root.scanner. At your system, things will probably be the same, so, putting > yourself in group "scanner" should do the trick.. > > AR> ls /etc/hotplug/usb > AR> kino-jogshuttle kino.usermap libgphoto2 libgphoto2.usermap > AR> (no reference to scanners) > > The directory /etc/hotplug.d/usb *does* hold a file: libsane.hotplug :) >
Yes, in my case ls -l /etc/hotplug.d/usb total 4 -rwxr-xr-x 1 root root 535 2005-04-20 10:28 libsane.hotplug and ls -lR /proc/bus/usb/ /proc/bus/usb/: total 0 dr-xr-xr-x 2 root root 0 2005-08-12 13:36 001 dr-xr-xr-x 2 root root 0 2005-08-12 13:36 002 dr-xr-xr-x 2 root root 0 2005-08-12 13:36 003 dr-xr-xr-x 2 root root 0 2005-08-12 13:36 004 -r--r--r-- 1 root root 0 2005-08-12 13:36 devices /proc/bus/usb/001: total 0 -rw-r--r-- 1 root root 43 2005-08-13 07:27 001 /proc/bus/usb/002: total 0 -rw-r--r-- 1 root root 43 2005-08-13 07:27 001 -rw-r--r-- 1 root root 57 2005-08-13 07:27 002 -rw-r--r-- 1 root root 50 2005-08-13 07:27 003 /proc/bus/usb/003: total 0 -rw-r--r-- 1 root root 43 2005-08-13 07:27 001 /proc/bus/usb/004: total 0 -rw-r--r-- 1 root root 43 2005-08-13 07:27 001 -rw-r--r-- 1 root root 50 2005-08-13 07:27 002 As far as I can tell, all here is owned by root, no scanner anywhere. Since I remembered doing something similar before, I had tried this solution before asking for help, so I had added myself to the scanner group, logged ut, back again, but nothing, still user can not use the scanner. My /proc/bus/usb/devices file shows the following (interesting that it is length 0, seems to be generated on the spot upon cat request): T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-686 uhci_hcd S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 S: SerialNumber=0000:00:1d.3 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9360 Rev= 1.00 S: Manufacturer= S: Product=USB Reader S: SerialNumber=9203111 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-686 uhci_hcd S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-686 uhci_hcd S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=0401 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=HP ScanJet 5200C S: SerialNumber=SG02CPEgina C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04e8 ProdID=324c Rev= 1.00 S: Manufacturer=Samsung Electronics Co., Ltd. S: Product=Samsung ML-1740 Series S: SerialNumber=2W61BKCX909482V0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04e8 ProdID=324c Rev= 1.00 S: Manufacturer=Samsung Electronics Co., Ltd. S: Product=Samsung ML-1740 Series S: SerialNumber=2W61BKCX909482V0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-686 uhci_hcd S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > AR> With reference to my multicard, when I connect it, dmesg and > AR> /var/log/kern.log don't reflect it. > > Can't help you there, sorry. > > Regards, > > Bob Thank you, you have been very generous. AR. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
