My SBLive Value is working fine under a whole bunch of different kernels, (thought not 2.4.19-pre8 in particular), in both OSS and ALSA mode.
On Mon, May 13, 2002 at 10:13:54PM -0500, Benjamin Pharr wrote: > I just bought a Soundblaster Live! soundcard, and I can't get it to > work. I'm running Debian GNU/Linux with the 2.4.19-pre8 kernel. When I > do a "modprobe emu10k1" it says: > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: > init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o failed > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod > emu10k1 failed Perhaps you need to manually load the modules? I seem to have emu10k1,ac97_core,sound and soundcore all loaded. Are you sure you're loading the right modules for the right kernel version? I can't see how this could screw up, but y'know... > I tried reseating the card to make sure it was in there good, but it > still didn't work. Any ideas? How does the output of lspci (in the pciutils package) look? This should rule out hardware problems. Failing that, then I'd try switching kernel to a different version...Are you running on a non-x86 platform? I seem to recall that there was some patching problem with 2.4.18 that left most all the non-Intel architectures screwed. -rob
pgpsVNM9wY1Mj.pgp
Description: PGP signature
