On Mon, May 13, 2002 at 10:13:54PM -0500, Benjamin Pharr wrote: > I just bought a Soundblaster Live! soundcard, and I can't get it to > work. I'm running Debian GNU/Linux with the 2.4.19-pre8 kernel. When I > do a "modprobe emu10k1" it says: > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: > init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o failed > /lib/modules/2.4.19-pre8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod > emu10k1 failed > > I tried reseating the card to make sure it was in there good, but it > still didn't work. Any ideas?
When I get this kind of message, it's usually an irq conflict. You can see by the command: #cat /proc/interrupts Also: #lspci to see if the card is recognized. You can also put the card in another pci slot in case of an irq conflict. Good luck John -- -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.debian.org/ http://www.pdxlinux.org/ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
pgpuQugO1Wbhr.pgp
Description: PGP signature
