dmesg returns this relevant info for 2.4.16:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=1106, DID=3149
PCI_IDE: chipset revision 128
PCI_IDE: 100% native mode on irq 20
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
VP_IDE: IDE controller on PCI bus 00 dev 79
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <[EMAIL PROTECTED]>
hde: Maxtor 6Y080L0, ATA DISK drive
hdg: IDE-DVD ROM 16x, ATAPI CD/DVD-ROM drive
hdh: ASUS CRW-4824AH, ATAPI CD/DVD-ROM drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2: probed IRQ 14 failed, using default.
ide3 at 0x170-0x177,0x376 on irq 15
ide3: probed IRQ 15 failed, using default.
hde: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [10587/240/63] p1 p2 p3 p4
For 2.4.22, 2.4.23, and 2.6.0, "hde" and "/dev/ide/host2" show up as "hda" and
"/dev/ide/host0".
The bios shows the hard drive as the first primary drive. The computer's got only one
hard drive, by the way.
Does this info help?
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
