TJ Sellari wrote: > I've been trying without success to run 2.4.22, 2.4.23, or 2.6.0 > kernels on Sarge. The problem seems to be that they see my hard drive > as hda rather than as hde. > > 2.4.16 (and Windows XP) sees the drive as hde, as do several versions > of tomsrtbt and Knoppix, and they all boot with no problems. The > drive is a Maxtor 6Y080L0 ATA. > > Using devfs, the drive is /dev/ide/host2/bus0/target0/lun0 > on 2.4.16, but /dev/ide/host0/bus0/target0/lun0 on the newer kernels.
How is it actually physically connected to your motherboard and how does it show in your bios? I haven't seen any similar problems with the newer kernels, what ide controller are you using as well? > > Error messages vary depending on the kernels, but they all end with: > > mount: /dev2/boot2 is not a valid block device > > /sbin/init: 338: cannot open dev/console: No such file > > Then the kernel panics. > > Any suggestions? > > Tom -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
