Hi all, i am still having trouble with bcm43xx. Had some usb wlan stick running. Unfortunately gave it away as i had bcm43xx running the first time with another access point. Since i have my own asus wl500gp router with its own openwrt linux running on it i cannot connect with bcm43xx while i can with macos.
I tried like % ifconfig eth2 up % iwconfig eth2 essid <essid> key <key> rate 11M % dhclient eth2 I switched on debugging in softmac and bcm43xx and dmesg shows sth like: bcm43xx: Microcode rev 0xf5, pl 0xcc (2004-01-21 19:04:18) bcm43xx: Radio turned on bcm43xx: Chip initialized bcm43xx: 30-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) PM: Adding info for No Bus:hw_random ADDRCONF(NETDEV_UP): eth2: link is not ready SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Unable to find matching network after scan! SoftMAC: Associate: Scanning for networks first. bcm43xx: set security called, .active_key = 0, .level = 1, .enabled = 1, .encrypt = 1 SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:17:31:bf:73:54 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:17:31:bf:73:54. SoftMAC: Open Authentication with 00:17:31:bf:73:54 failed, error code: 13 Does anybody know whats going wrong? % iwlist eth2 scanning shows my network as well does kismet run without any issues, only the connect fails =(. Any help is very welcome. I don't have eny firewall rules, all iptables chains are open. If i set wep to off only for test i see the same in dmesg (after unloading the module and restarting modproge, ifconfig .. up, iwconfig... bcm43xx: Microcode rev 0xf5, pl 0xcc (2004-01-21 19:04:18) bcm43xx: Radio turned on bcm43xx: Chip initialized bcm43xx: 30-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) PM: Adding info for No Bus:hw_random ADDRCONF(NETDEV_UP): eth2: link is not ready SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Scanning finished: scanned 14 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:17:31:bf:73:54 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:17:31:bf:73:54. SoftMAC: Open Authentication with 00:17:31:bf:73:54 failed, error code: 13 SoftMAC: Already associating or associated to 00:17:31:bf:73:54 Thanks, frustrtated, Joerg On 5 May 2007 16:45:39 GMT, Jack Malmostoso <[EMAIL PROTECTED]> wrote: > On Sat, 05 May 2007 16:00:08 +0200, William Xu wrote: > >> Ah, it seems that's the cause. After completely removing MOL, the >> wireless network finally comes up, for the first time! > > I guess it's not fair to call this a bug, but maybe it could be useful to > introduce in the MOL documentation a setup guide to enable networking in > MOL without breaking it in the guest system. I am not expert enough with > iptables to really debug what happened, but I couldn't get the network to > work even by flushing all iptables rules (iptables -F). The only way was > to setup the network as desired and then reboot. No way to make it work > without a reboot. > > Then I realized I didn't really need networking in MOL, so I just > uninstalled the thing. > > Maybe a wishlist priority bug could do. > >> Thanks for your help. > > Glad I could help :) > > -- > Best Regards, Jack > Linux User #264449 > Powered by Debian GNU/Linux on AMD64 > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
