On Mon, 2003-10-06 at 13:38, Sven Luther wrote:
>
> > Last time I tried miboot.image build myself it did not boot. I'll try
> > this one later this week to let you know.
I just wanted to add that this was with benH tree grabbed from BK.
> >
> > My biggest problem is AHA2930B (SCSI controller) support in the kernel
> > that seemed to be missing from any pre-build package I found beside
> > 2.2.20....
> >
> > AHA2930B is the only reason I use miboot instead of quik.
>
> Mmm, The aic7xxx_old.c driver does have a line :
>
> PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_2930U2, AHC_AIC7890,
>
> But i suppose this is not the same (2930U2 instead of 2930B).
Here is the PCI info (/proc/pci from 2.2.20)
Bus 0, device 17, function 0:
SCSI storage controller: Adaptec AIC-7860 (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 30. Master
Capable. Latency=32. Min Gnt=4.Max Lat=4.
I/O at 0x0 [0x1].
Non-prefetchable 32 bit memory at 0x80800000 [0x80800000].
OF device is:
bandit/ADPT,2930BU
and it is not OF bootable :-( hence, no quik.
It seems to be in the aic7xxx driver.
Each time I tried to boot with miBoot from a pre-build 2.4 kernel it did
not find the adapter. Each I try to boot a kernel I build, (using
image.miboot, or zImage), miBoot just fails.
Hub
--
Hubert Figuière - Freebox SA. - +33 1 73 50 2 563
AIM: hfiguiere, ICQ: 307453487
