On Mon, 2003-07-28 at 13:30, Michel Dänzer wrote: > On Sun, 2003-07-27 at 20:37, Soeren Sonnenburg wrote: > > On Sun, 2003-07-27 at 00:21, Michel Dänzer wrote: > > [...] > > > > (EE) RADEON(0): Cannot read V_BIOS (5) > > > > Symbol RADEONResetVideo from module > > > > /usr/X11R6/lib/modules-dri-trunk/drivers/radeon_drv.o is unresolved! > > > > > > This was my fuckup, fixed in 2003.07.25-2. > > > > True, does not crash anymore... but does also now only show a white > > screen with some black dots... > > Do you mean the startup root weave or something else? On the internal > panel or the external display?
No no, not the alternating black/white pixels, but a 99.99% white screen with some black dots. > Well, there's no way around scrolling with clone mode unless both > displays support the same resolution. > > Does this still work with the new driver if you leave out the > > Modes "1280x854" > > from the Display subsection, possibly replacing it with > > Virtual 1280 854 The new driver does not (yet) work here ... but I could try it out with the old one this evening. > > Is it actually possible to have say :0.1 running at 1280x1024 on the > > external vga but on the internal DFP :0.0 the needed 1280x854 ? > > Yes, that should be possible with a 'true' multihead configuration > involving two Device and Screen sections. Ok... will try that when the very basic config actually works. I am very open for stuff to try out... Best, Soeren.
