Ok Benjamin, hardware was not the trouble but wvdial Wvdial 1.53 work fine with kernel 2.2.20-pmac
For kernel 2.4.18-newpmac you must use pppconfig & pon/poff ISP tools Thanks Vincent Le mer 09/07/2003 à 14:42, Benjamin Herrenschmidt a écrit : > On Tue, 2003-07-08 at 19:53, Vincent wrote: > > Hi, > > > > I'm using a G3 lombard an woody 3.0r0 > > Modem works fine with kernel vmlinux-2.2.20-pmac > > > > But with kernel vmlinux-2.4.18-newpmac modem can not dialout > > It make ATZ but nothing else > > When you manually use the modem (in minicom for example), > does it work ? > > What typically happens is that the modem takes about 2 seconds > to power up, and you get nothing during this time (output is > even blocked in the driver). The old driver used to block the > open() call when powering up the modem. This isn't quite what > should be done, so newer drivers will just block output, however, > some dialers seem to timeout in that case... > > Ben. > > _____________________________________________________________________ > Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger > http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France _____________________________________________________________________ Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France
