On Tue, Jul 11, 2000 at 12:30:23PM -0500, Josh wrote: > I have followed directions fropm http://www.roelle.com/wvlanPPC/index.html. > compiled kernel 2.2.16 ok. installed pcmcia-cs-3.1.17 > patched with pcmcia-3.1.17-pmac-3.1.17 and wvlan-3.1.17-ppc-0.4.patch > > added to /etc/pcmcia/config.opts: > > module "wvlan_cs" opts "port_type=1 network_name=my_airport_name" > (although I wasn't sure if I should use 'station_name' instead of > 'network_name' as > in the example in the config.opts file) > > started pcmcia service > inserted card and got 2 beeps, as is supposed to happen. > But lights keep blinking, center light does not go solid. > Network name is correct, as far as I can tell. > > Is there anything else I should do? > > (After above I added to /etc/network/interfaces: > > iface wvlan0 inet dhcp > hostname myhost > > Do I need to comment out my eth0 lines or anything?
After doing this, try running # ifup wvlan0 If you're using the stock PCMCIA packages, they don't automatically run the ifup command. Also, check ifconfig wvlan0 and see if you've got a good hardware address. my line in config.opts looks like: module "wvlan_cs" opts "station_name=huberj_wireless" Good luck...I have a feeling you're close :), -- Josh 6B21489A | GnuPG ID/Fingerprint | [EMAIL PROTECTED] | 61F0 6138 BE7B FEBF A223 E9D1 BFE1 2065 6B21 489A
pgpGDh1EdMFe7.pgp
Description: PGP signature
