-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I don't see your addon hardware anywhere in the information you've provided ?
rrs On Tuesday 22 February 2005 12:53 am, Kaiser, Hans wrote: > Hello Ritesh Raj, > > Thanks for your quick response! > > I have a thinkpad A31p with two integrated USB1.1 Ports. But I need to use > a USB2.0 HDD, which I try to connect with a separate PCMCIA USB2.0 Card > (two additional USB 2.0 Ports). > > Under Suse it runs fine with 480MBit under debian sarge I get only slow > 12MBit. > > Sorry for the very long mail... > > Here my analysis, I cannot find an error: > > ------------------------------ > SuSE 9: > > > T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.5-7.111.19-default ehci_hcd > S: Product=EHCI Host Controller > S: SerialNumber=0000:03:00.2 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.5-7.111.19-default ohci_hcd > S: Product=OHCI Host Controller > S: SerialNumber=0000:03:00.1 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > ------------------------------ > > Debian sarge > > > T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.8-2-686 ehci_hcd > S: Product=NEC Corporation USB 2.0 > S: SerialNumber=0000:03:00.2 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.8-2-686 ohci_hcd > S: Product=NEC Corporation USB (#2) > S: SerialNumber=0000:03:00.1 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > ------------------------------ > > Loaded Modules: > > SuSE > > Module Size Used by > snd_seq 54928 1 > ehci_hcd 27908 0 > ohci_hcd 19332 0 > > ------------------------------ > > Debian sarge > > Module Size Used by > ohci_hcd 21764 0 > ehci_hcd 32004 0 - -- Ritesh Raj Sarraf RESEARCHUT -- http://www.researchut.com Gnupg Key ID: 04F130BC "Stealing logic from one person is plagiarism, stealing from many is research". -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCGmcU4Rhi6gTxMLwRAvDoAJwO2939coFU4xlrr65G1alIeje5AwCgpYts 60Rgjb98JAP3e6ZZ/t6sDN0= =nnVz -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
