Hello Phil, Am 18:27 2003-01-09 +0000 hat Phil Reynolds geschrieben:
># cat /proc/pci > Bus 1, device 0, function 0: > Ethernet controller: (rev 16). > Master Capable. Latency=64. Min Gnt=10.Max Lat=5. OK, there is a NIC ># dmesg (from loading of PCMCIA Card Services only) >Intel ISA/PCI/CardBus PCIC probe: >3c59x.c:v0.99Q 5/16/2000 Donald Becker, [EMAIL PROTECTED] > http://www.scyld.com/network/vortex.html >cs: cb_config(bus 1) >cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x220-0x22f 0x250-0x257 0x270-0x277 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7 >cs: IO port probe 0x0230-0x024f: clean. >cs: IO port probe 0x0258-0x026f: clean. >cs: IO port probe 0x0278-0x032f: clean. >cs: IO port probe 0x0338-0x0377: clean. >cs: IO port probe 0x0380-0x0387: clean. >cs: IO port probe 0x0390-0x03bf: clean. >cs: IO port probe 0x03e0-0x0407: clean. >cs: IO port probe 0x0410-0x04cf: clean. >cs: IO port probe 0x04d8-0x04ff: clean. >cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x83f 0x850-0x87f >cs: IO port probe 0x0880-0x08ff: clean. >cs: IO port probe 0x0a00-0x0aff: clean. >cs: IO port probe 0x0c00-0x0cff: excluding 0xc48-0xc4f 0xc68-0xc6f >cs: IO port probe 0x0c50-0x0c67: clean. >cs: IO port probe 0x0c70-0x0cff: clean. >cs: could not allocate 512 IO ports for CardBus socket 0 >cs: cb_release(bus 1) They found a compatible 3c59x NIC >3c575_cb: RequestIO: Out of resource >PCI: No IRQ known for interrupt pin A of device . Please try using pci=biosirq. Not found, so you do not need the module... >3c59x: Donald Becker and others. www.scyld.com/network/vortex.html >: 3Com PCI 3CXFEM656C Tornado+Winmodem CardBus at 0x0. Vers LK1.1.16 >PCI: Setting latency timer of device to 64 > *** Warning: IRQ 0 is unlikely to work! *** OK, your PCMCIA is 3c59x compatibel... But they need an interrupt. Maybe you must setup the IRQ manualy... On the other hand the IRQ problem may be a problem of the Winmodem and not of the NIC... >Any suggestions would be welcome. Michelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
