In accordance with my changing work role, I have just received a laptop, and been advised to run an operating system I know well and can run X clients on.
Naturally, I would like this to be Debian, but on trying to install woody, I
have run into some difficulties.
The computer is a Compaq Armada 7792DMT. The network card is a 3Com, model
printed on it is 3C3FEM656C, shows up as 3CXFEM656C in Debian.
I am unable to get the network card drivers installed enough to enable a link
light to appear on my hub. It has been suggested that this could be due
to the PCMCIA bridge, rather than the network card, and that I need to
include some configuration switches, but I have not received much in the way
of help.
I really do not want to have to run Windows on this machine, so any help
would be appreciated.
I am including below the contents of /proc/pci and the last few messages in
dmesg.
# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Compaq Computer Corporation NorthStar CPU to PCI Bridge (rev 1).
Master Capable. Latency=66.
Bus 0, device 12, function 0:
CardBus bridge: Texas Instruments PCI1131 (rev 1).
IRQ 11.
Master Capable. Latency=66. Min Gnt=128.Max Lat=7.
Non-prefetchable 32 bit memory at 0x7fffe000 [0x7fffefff].
Bus 0, device 12, function 1:
CardBus bridge: Texas Instruments PCI1131 (#2) (rev 1).
IRQ 11.
Master Capable. Latency=66. Min Gnt=192.Max Lat=7.
Non-prefetchable 32 bit memory at 0x7ffff000 [0x7fffffff].
Bus 0, device 13, function 0:
VGA compatible controller: S3 Inc. 86cM65 [Aurora64V+] (rev 67).
IRQ 11.
Non-prefetchable 32 bit memory at 0x40000000 [0x43ffffff].
Bus 0, device 14, function 0:
ISA bridge: Compaq Computer Corporation MIS-L (rev 4).
Bus 0, device 14, function 1:
IDE interface: Compaq Computer Corporation Triflex Dual EIDE Controller (rev 3).
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0xb140 [0xb14f].
Bus 1, device 0, function 0:
Ethernet controller: (rev 16).
Master Capable. Latency=64. Min Gnt=10.Max Lat=5.
Bus 1, device 0, function 1:
Communication controller: (rev 16).
Master Capable. No bursts. Min Gnt=10.Max Lat=5.
# dmesg (from loading of PCMCIA Card Services only)
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
TI 1131 rev 01 PCI-to-CardBus at slot 00:0c, mem 0x7fffe000
host opts [0]: [pci + serial irq] [pci irq 11] [lat 66/176] [bus 1/1]
host opts [1]: [pci + serial irq] [pci irq 11] [lat 66/176] [bus 2/2]
ISA irqs (scanned) = 3,4,7,9,10,15 PCI status changes
cs: cb_alloc(bus 1): vendor 0x10b7, device 0x6564
3c59x.c:v0.99Q 5/16/2000 Donald Becker, [EMAIL PROTECTED]
http://www.scyld.com/network/vortex.html
cs: cb_config(bus 1)
cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x220-0x22f 0x250-0x257
0x270-0x277 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x0230-0x024f: clean.
cs: IO port probe 0x0258-0x026f: clean.
cs: IO port probe 0x0278-0x032f: clean.
cs: IO port probe 0x0338-0x0377: clean.
cs: IO port probe 0x0380-0x0387: clean.
cs: IO port probe 0x0390-0x03bf: clean.
cs: IO port probe 0x03e0-0x0407: clean.
cs: IO port probe 0x0410-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x83f 0x850-0x87f
cs: IO port probe 0x0880-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xc48-0xc4f 0xc68-0xc6f
cs: IO port probe 0x0c50-0x0c67: clean.
cs: IO port probe 0x0c70-0x0cff: clean.
cs: could not allocate 512 IO ports for CardBus socket 0
cs: cb_release(bus 1)
Trying to free nonexistent resource <00000000-000001ff>
3c575_cb: RequestIO: Out of resource
PCI: No IRQ known for interrupt pin A of device . Please try using pci=biosirq.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
: 3Com PCI 3CXFEM656C Tornado+Winmodem CardBus at 0x0. Vers LK1.1.16
PCI: Setting latency timer of device to 64
*** Warning: IRQ 0 is unlikely to work! ***
(by the way, I have tried pci=biosirq, it causes card services to segfault.)
Any suggestions would be welcome.
--
Phil Reynolds (PGP now available)
o ____ Internet: [EMAIL PROTECTED]
|L_ \ / Web: http://www.tinsleyviaduct.com/phil/
(_)- \/ Waltham 67, Emley Moor 69, Droitwich 79, Windows 95
msg10405/pgp00000.pgp
Description: PGP signature
