Hello eveyone.
After "apt-get update;apt-get upgrade" ,especially "pcmcia-cs_3.1.29-1_i386.deb",
something is changed.
(it's because after "dpkg -i pcmcia-cs_3.1.29-1_i386.deb", the stuation is same as
before.)
I also install hotplug{,-utils} pakage.
1, "/var/log/syslog" was changed. Insering CardBus NIC, the following appears.
-------------------
<insert> Oct 28 19:48:21 darkstar kernel: cs: cb_alloc(bus 21): vendor 0x13d1, device
0xab02
<insert> Oct 28 19:48:21 darkstar kernel: PCI: Enabling device 15:00.0 (0000 -> 0003)
<insert> Oct 28 19:48:21 darkstar kernel: PCI: Setting latency timer of device 15:00.0
to 64
<insert> Oct 28 19:48:21 darkstar kernel: eth0: ADMtek Comet rev 17 at 0x4800,
xx:xx:xx:xx:xx:xx, IRQ 11.
<insert> Oct 28 19:48:21 darkstar cardmgr[1217]: socket 1: CardBus hotplug device
<insert> Oct 28 19:48:21 darkstar /etc/hotplug/net.agent: invoke ifup eth0
<insert> Oct 28 19:48:21 darkstar /etc/hotplug/pci.agent: Modprobe and setup tulip for
PCI slot 15:00.0
$eject$ Oct 28 19:48:44 darkstar kernel: cs: cb_free(bus 21)
$eject$ Oct 28 19:48:44 darkstar /etc/hotplug/net.agent: invoke ifdown eth0
$eject$ Oct 28 19:48:44 darkstar /etc/hotplug/pci.agent: PCI remove event not
supported
-------------------
2, I can't hear the sound "P-, P-" inserting CarBus NIC. ( pcmica card is OK. I can
hear.)
3, And CardBus NIC doesn't work. ;-)
On Sat, 27 Oct 2001 04:05:49 +0900
Kazuhiko Uebayashi <[EMAIL PROTECTED]> wrote:
> Hi, I'm Kazuhiko Uebayashi.
>
> I'm in trouble now in using Cardbus NIC(Network Interface Card).
>
> On kernel 2.2.19 with pcmcia-modules(make-kpkg from pcmcia-source),
> I can use this Cardbus NIC.
>
> But after I change kernel to 2.4.12,it dosen't work well.
>
> /var/log/syslog says the following,
> ------------------------
> Oct 27 03:55:01 darkstar kernel: cs: cb_free(bus 21)
> Oct 27 03:55:01 darkstar cardmgr[201]: shutting down socket 1
> Oct 27 03:55:01 darkstar cardmgr[201]: executing: 'modprobe -r tulip_cb'
> Oct 27 03:55:01 darkstar cardmgr[201]: executing: 'modprobe -r cb_enabler'
> Oct 27 03:55:03 darkstar kernel: cs: cb_alloc(bus 21): vendor 0x13d1, device 0xab02
> Oct 27 03:55:03 darkstar kernel: PCI: Enabling device 15:00.0 (0000 -> 0003)
> Oct 27 03:55:03 darkstar cardmgr[201]: initializing socket 1
> Oct 27 03:55:03 darkstar cardmgr[201]: socket 1: Linksys Etherfast 10/100
> Oct 27 03:55:03 darkstar cardmgr[201]: executing: 'modprobe cb_enabler'
> Oct 27 03:55:03 darkstar cardmgr[201]: + modprobe: Can't locate module cb_enabler
> Oct 27 03:55:03 darkstar cardmgr[201]: modprobe exited with status 255
> Oct 27 03:55:03 darkstar cardmgr[201]: module
>/lib/modules/2.4.12/pcmcia/cb_enabler.o not available
> Oct 27 03:55:03 darkstar cardmgr[201]: executing: 'modprobe tulip_cb'
> Oct 27 03:55:03 darkstar cardmgr[201]: + modprobe: Can't locate module tulip_cb
> Oct 27 03:55:03 darkstar cardmgr[201]: modprobe exited with status 255
> Oct 27 03:55:03 darkstar cardmgr[201]: module /lib/modules/2.4.12/pcmcia/tulip_cb.o
>not available
> Oct 27 03:55:04 darkstar cardmgr[201]: get dev info on socket 1 failed: Resource
>temporarily unavailable
> --------------------------.
>
> I can't understand well what the log means.
>
> Is it possible to use Carbus NIC (ADMtek 985 Chip)
> on kernel 2.4.12 without pcmcia-modules?
>
> Could you tell me how to use this CardBus NIC without pcmcia-modules?
>
> In case using pcmcia-modules,
> Do I had better to remove pcmcia-net-driver support from kernel?
>
> --
> Kazuhiok Uebyashi
> e-mail : [EMAIL PROTECTED]
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
>
--
Kazuhiok Uebyashi
e-mail : [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
