Hi, I'm Kazuhiko Uebayashi. I'm in trouble now in using Cardbus NIC(Network Interface Card).
On kernel 2.2.19 with pcmcia-modules(make-kpkg from pcmcia-source), I can use this Cardbus NIC. But after I change kernel to 2.4.12,it dosen't work well. /var/log/syslog says the following, ------------------------ Oct 27 03:55:01 darkstar kernel: cs: cb_free(bus 21) Oct 27 03:55:01 darkstar cardmgr[201]: shutting down socket 1 Oct 27 03:55:01 darkstar cardmgr[201]: executing: 'modprobe -r tulip_cb' Oct 27 03:55:01 darkstar cardmgr[201]: executing: 'modprobe -r cb_enabler' Oct 27 03:55:03 darkstar kernel: cs: cb_alloc(bus 21): vendor 0x13d1, device 0xab02 Oct 27 03:55:03 darkstar kernel: PCI: Enabling device 15:00.0 (0000 -> 0003) Oct 27 03:55:03 darkstar cardmgr[201]: initializing socket 1 Oct 27 03:55:03 darkstar cardmgr[201]: socket 1: Linksys Etherfast 10/100 Oct 27 03:55:03 darkstar cardmgr[201]: executing: 'modprobe cb_enabler' Oct 27 03:55:03 darkstar cardmgr[201]: + modprobe: Can't locate module cb_enabler Oct 27 03:55:03 darkstar cardmgr[201]: modprobe exited with status 255 Oct 27 03:55:03 darkstar cardmgr[201]: module /lib/modules/2.4.12/pcmcia/cb_enabler.o not available Oct 27 03:55:03 darkstar cardmgr[201]: executing: 'modprobe tulip_cb' Oct 27 03:55:03 darkstar cardmgr[201]: + modprobe: Can't locate module tulip_cb Oct 27 03:55:03 darkstar cardmgr[201]: modprobe exited with status 255 Oct 27 03:55:03 darkstar cardmgr[201]: module /lib/modules/2.4.12/pcmcia/tulip_cb.o not available Oct 27 03:55:04 darkstar cardmgr[201]: get dev info on socket 1 failed: Resource temporarily unavailable --------------------------. I can't understand well what the log means. Is it possible to use Carbus NIC (ADMtek 985 Chip) on kernel 2.4.12 without pcmcia-modules? Could you tell me how to use this CardBus NIC without pcmcia-modules? In case using pcmcia-modules, Do I had better to remove pcmcia-net-driver support from kernel? -- Kazuhiok Uebyashi e-mail : [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
