NOKUBI Takatsugu wrote: > In article <[EMAIL PROTECTED]> > [EMAIL PROTECTED] writes: > > >>>Then does the following make any sense: >>>I used to configure this as a /dev/ttyS1 serial device >>>ttyS1 is associated with io 2f8. >>>nsc-... is associated with io 2e8 >>>Windows/Bios show this as io 0x02f8, irq 3, dma 3 >>> >>> >>>Can I just change the serial device? >>> > > If you want to use nsc-ircc, do the following command: > > # setserial /dev/ttyS1 uart none port 0 irq 0 >
I've tried this, and it had some success. But a larger problem I'm running into is that one of the IR related modules is causing my PCMCIA wireless card to go into some bizarre loop of 'NETDEV WATCHDOG' driven re-initializations. The last that this worked for me was on a 2.2 kernel. I am having a lot of troubles with this one... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
