In article <[EMAIL PROTECTED]> [EMAIL PROTECTED] writes: >> and syslog says: >> executing: '/sbin/modprobe irda0' >> nsc-ircc, Found chip at base=0x2e >> nsc-ircc, driver loaded (Dag Brattle) >> nsc-ircc_open(), can't get iobase of 0x2f8 >> + /lib/modules/2.2.19/misc/nsc-ircc.o: init_module: Device or resource busy >> + /lib/modules/2.2.19/misc/nsc-ircc.o: insmod >> /lib/modules/2.2.19/misc/nsc-ircc.o failed It should be nsc-ircc UART emulation probrem. Could you try the following commands? # setserial /dev/ttyS1 uart none port 0x02f8 # /etc/init.d/irda start -- NOKUBI Takatsugu E-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] / [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
