Your message dated Mon, 29 Jul 2013 16:19:52 +0100
with message-id <1375111192.2546.73.ca...@deadeye.wl.decadent.org.uk>
and subject line Re: linux-image-3.9-1-amd64: Not detected laptop webcam with
Jessie (ver: 3.9.8-1) although Wheezy (ver: 3.2.35-2) did it
has caused the Debian Bug report #716827,
regarding linux-image-3.9-1-amd64: Not detected laptop webcam with Jessie (ver:
3.9.8-1) although Wheezy (ver: 3.2.35-2) did it
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
716827: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=716827
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.9.8-1
Severity: normal
Dear Maintainer,
I installed Wheezy on March when frozen. This was version 3.2.35-2 of the
linux-image. The tested the webcam using Cheese because the laptop was recently
adquired. It worked out-of-the-box. The installer logged it as
/var/log/installer/hardware-summary:
usb-list: Bus 03 Device 03: BisonCam, NB Pro [5986:0400]
usb-list: Level 02 Parent 02 Port 00 Class ef(misc ) Subclass 02
Protocol 01
usb-list: Manufacturer: Bison
usb-list: Interface 00: Class 0e(video) Subclass 01 Protocol 00
Driver <none>
usb-list: Interface 01: Class 0e(video) Subclass 02 Protocol 00
Driver <none>
usb-list:
A month after releasing Wheezy as stable, I updated to Jessie. Last week I
wanted to use the webcam with Cheese again. The program started but nothing was
displayed. Messages in ~/.xsession-errors said that there was not any device. I
installed Camorama obtaining similar behavior and errors.
After searching, I was aware that any application can use /dev/video* because
it does not exist on my system. Neither any module related with a webcam is
loaded when booting the system (uvcvideo, ...). I loaded it manually via
modprobe and automatically using /etc/modules. The modules are loaded well but
nothing else happens (absence of /dev/video* file). Any log file in /var/log/*
makes reference to a webcam. Not a word using lspci and lsusb.
I am only a user and I have run out of ideas. If necessary, I can provide the
initial installation log files.
Thank you in advance,
robert
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/nyxVG-root ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 19.154782] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 19.154787] ACPI: Sleep Button [SLPB]
[ 19.154849] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 19.155499] ACPI: Lid Switch [LID0]
[ 19.155580] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 19.155585] ACPI: Power Button [PWRF]
[ 19.156091] ACPI: Requesting acpi_cpufreq
[ 19.159414] ACPI: AC Adapter [AC] (on-line)
[ 19.160613] ACPI: Battery Slot [BAT0] (battery absent)
[ 19.166408] wmi: Mapper loaded
[ 19.171240] mei 0000:00:16.0: setting latency timer to 64
[ 19.171307] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 19.181240] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 19.183319] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 19.183325] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.183330] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 19.183334] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.183335] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 19.183339] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.183340] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.185048] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO
conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 19.185055] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.195962] cfg80211: Calling CRDA to update world regulatory domain
[ 19.206250] [drm] Initialized drm 1.1.0 20060810
[ 19.216139] [drm] Memory usable by graphics device = 2048M
[ 19.216146] i915 0000:00:02.0: setting latency timer to 64
[ 19.223399] iTCO_vendor_support: vendor-support=0
[ 19.223856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 19.223894] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 19.223950] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.228590] Bluetooth: Core ver 2.16
[ 19.228602] NET: Registered protocol family 31
[ 19.228604] Bluetooth: HCI device and connection manager initialized
[ 19.228610] Bluetooth: HCI socket layer initialized
[ 19.228613] Bluetooth: L2CAP socket layer initialized
[ 19.228617] Bluetooth: SCO socket layer initialized
[ 19.229654] usbcore: registered new interface driver btusb
[ 19.230209] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[ 19.235223] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 19.235231] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.235232] [drm] Driver supports precise vblank timestamp query.
[ 19.235277] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.237620] rtl8723ae 0000:02:00.0: firmware: agent aborted loading
rtlwifi/rtl8723fw_B.bin (not found?)
[ 19.251503] cfg80211: World regulatory domain updated:
[ 19.251506] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 19.251509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 19.251511] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 19.251513] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 19.251514] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 19.251516] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 19.277923] fbcon: inteldrmfb (fb0) is primary device
[ 20.314061] Console: switching to colour frame buffer device 170x48
[ 20.320634] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 20.320638] i915 0000:00:02.0: registered panic notifier
[ 20.427974] ACPI Warning: _BQC returned an invalid level (20130117/video-502)
[ 20.428051] acpi device:43: registered as cooling_device8
[ 20.428109] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.428195] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.428422] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.428815] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 20.451802] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.451929] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.452027] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.473809] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 20.508304] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input10
[ 20.805666] Adding 8785916k swap on /dev/mapper/nyxVG-swap. Priority:-1
extents:1 across:8785916k SS
[ 20.825946] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 20.864252] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 20.900820] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 21.033276] fuse init (API version 7.21)
[ 21.045507] loop: module loaded
[ 21.654666] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 22.078342] RPC: Registered named UNIX socket transport module.
[ 22.078348] RPC: Registered udp transport module.
[ 22.078350] RPC: Registered tcp transport module.
[ 22.078352] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.084135] FS-Cache: Loaded
[ 22.084808] Key type dns_resolver registered
[ 22.092392] FS-Cache: Netfs 'nfs' registered for caching
[ 22.101514] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 22.523528] vboxdrv: Found 8 processor cores.
[ 22.523689] vboxdrv: fAsync=0 offMin=0x164 offMax=0x1afb
[ 22.523753] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 22.523755] vboxdrv: Successfully loaded version 4.2.10_Debian (interface
0x001a0004).
[ 22.572815] vboxpci: IOMMU not found (not registered)
[ 22.604457] Bluetooth: RFCOMM TTY layer initialized
[ 22.604465] Bluetooth: RFCOMM socket layer initialized
[ 22.604467] Bluetooth: RFCOMM ver 1.11
[ 22.606833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.606836] Bluetooth: BNEP filters: protocol multicast
[ 22.606842] Bluetooth: BNEP socket layer initialized
[ 22.640600] lp: driver loaded but no devices found
[ 22.643637] ppdev: user-space parallel port driver
[ 22.704547] r8169 0000:03:00.2: firmware: agent loaded rtl_nic/rtl8411-1.fw
into memory
[ 22.780769] r8169 0000:03:00.2 eth0: link down
[ 22.780783] r8169 0000:03:00.2 eth0: link down
[ 22.780810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.510210] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input11
[ 24.391994] r8169 0000:03:00.2 eth0: link up
[ 24.392017] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: CLEVO CO.
product_name: W55xEU
product_version: Not Applicable
chassis_vendor: No Enclosure
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 4.6.5
board_vendor: CLEVO CO.
board_name: W55xEU
board_version: D02
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
pci_stub
cpufreq_stats
vboxpci(O)
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
loop
fuse
joydev
snd_hda_codec_hdmi
snd_hda_codec_via
btusb
bluetooth
iTCO_wdt
iTCO_vendor_support
snd_hda_intel
snd_hda_codec
snd_hwdep
rtl8723ae
i915
snd_pcm
rtlwifi
snd_page_alloc
mac80211
snd_seq
coretemp
snd_seq_device
drm_kms_helper
snd_timer
drm
kvm_intel
cfg80211
i2c_algo_bit
kvm
snd
rfkill
rtsx_pci_ms
i2c_i801
i2c_core
psmouse
pcspkr
memstick
soundcore
serio_raw
evdev
lpc_ich
acpi_cpufreq
mei
mperf
wmi
video
battery
processor
ac
button
ext4
crc16
jbd2
mbcache
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
rtsx_pci_sdmmc
mmc_core
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
microcode
r8169
mii
rtsx_pci
mfd_core
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
ehci_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7d1b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7200000-f7bfffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6800000-f71fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC
Controller [8086:1e57] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE
PCIe Wireless Network Adapter [10ec:8723]
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0726]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8723ae
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device
[10ec:5289] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:0540]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
03:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Subsystem: CLEVO/KAPOK Computer Device [1558:0540]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f0a04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0a00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 002: ID 0bda:8723 Realtek Semiconductor Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--- End Message ---
--- Begin Message ---
Closing as requested.
Ben.
--
Ben Hutchings
The two most common things in the universe are hydrogen and stupidity.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
