And what exactly was/is the key combination in case others (like me) need it and have no clue about it? :-)
On 7/29/13, robert <robert.carde...@gmail.com> wrote: > Package: src:linux > Version: 3.9.8-1 > Followup-For: Bug #716827 > > Dear Maintainer, > > The bug can be closed. > > * What exactly did you do (or not do) that was effective (or > ineffective)? > > The reported camera had been deactivated by hardware by mean of a > rather bizarre key combination. > After realizing that, I activated it. Now the camera is working > without any problem. > > Sorry for the annoyance. I really didn't know that it is possible > to > change the camera state in this way. > > robert > > > > -- Package-specific info: > ** Version: > Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version > 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1 > > ** Command line: > BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/nyxVG-root ro quiet > > ** Tainted: O (4096) > * Out-of-tree module has been loaded. > > ** Kernel log: > [ 17.132399] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO > conflicts with Region \GPIO 1 (20130117/utaddress-251) > [ 17.132409] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 17.132413] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 17.132670] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO > conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251) > [ 17.132698] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 17.133041] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X > [ 17.140257] iTCO_vendor_support: vendor-support=0 > [ 17.140857] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > [ 17.140901] iTCO_wdt: Found a Panther Point TCO device (Version=2, > TCOBASE=0x0460) > [ 17.140993] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 17.153707] input: HDA Intel PCH HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 > [ 17.153863] input: HDA Intel PCH Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 > [ 17.154003] input: HDA Intel PCH Front Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > [ 17.173250] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: > 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762 > [ 17.208092] input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio2/input/input10 > [ 17.460063] ACPI: AC Adapter [AC] (off-line) > [ 17.461015] ACPI Error: [_T_0] Namespace lookup failure, > AE_ALREADY_EXISTS (20130117/dswload2-330) > [ 17.461027] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog > (20130117/psobject-222) > [ 17.461033] ACPI Error: Method parse/execution failed [\_SB_.AC__.ADJP] > (Node ffff88021549dce0), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461043] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] > (Node ffff88021549dd30), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461056] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter > state (20130117/ac-122) > [ 17.461287] ACPI Error: [_T_0] Namespace lookup failure, > AE_ALREADY_EXISTS (20130117/dswload2-330) > [ 17.461299] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog > (20130117/psobject-222) > [ 17.461304] ACPI Error: Method parse/execution failed [\_SB_.AC__.ADJP] > (Node ffff88021549dce0), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461314] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] > (Node ffff88021549dd30), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461325] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter > state (20130117/ac-122) > [ 17.461878] ACPI Error: [_T_0] Namespace lookup failure, > AE_ALREADY_EXISTS (20130117/dswload2-330) > [ 17.461906] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog > (20130117/psobject-222) > [ 17.461911] ACPI Error: Method parse/execution failed [\_SB_.AC__.ADJP] > (Node ffff88021549dce0), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461919] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] > (Node ffff88021549dd30), AE_ALREADY_EXISTS (20130117/psparse-537) > [ 17.461933] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter > state (20130117/ac-122) > [ 17.467192] ACPI: Marking method ADJP as Serialized because of > AE_ALREADY_EXISTS error > [ 17.468112] ACPI: Marking method _PSR as Serialized because of > AE_ALREADY_EXISTS error > [ 17.775074] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off > [ 17.975784] ACPI: Battery Slot [BAT0] (battery present) > [ 17.976227] wmi: Mapper loaded > [ 18.315303] Adding 8785916k swap on /dev/mapper/nyxVG-swap. Priority:-1 > extents:1 across:8785916k SS > [ 18.340752] EXT4-fs (dm-1): re-mounted. Opts: (null) > [ 18.442669] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro > [ 18.712810] fuse init (API version 7.21) > [ 18.725937] loop: module loaded > [ 19.039358] EXT4-fs (dm-3): mounted filesystem with ordered data mode. > Opts: (null) > [ 19.472002] RPC: Registered named UNIX socket transport module. > [ 19.472008] RPC: Registered udp transport module. > [ 19.472010] RPC: Registered tcp transport module. > [ 19.472013] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 19.477782] FS-Cache: Loaded > [ 19.478573] Key type dns_resolver registered > [ 19.486518] FS-Cache: Netfs 'nfs' registered for caching > [ 19.496221] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). > [ 19.981988] vboxdrv: Found 8 processor cores. > [ 19.982282] vboxdrv: fAsync=0 offMin=0x370 offMax=0x2b32 > [ 19.982428] vboxdrv: TSC mode is 'synchronous', kernel timer mode is > 'normal'. > [ 19.982433] vboxdrv: Successfully loaded version 4.2.16_Debian (interface > 0x001a0005). > [ 20.094951] vboxpci: IOMMU not found (not registered) > [ 20.141554] Bluetooth: RFCOMM TTY layer initialized > [ 20.141575] Bluetooth: RFCOMM socket layer initialized > [ 20.141579] Bluetooth: RFCOMM ver 1.11 > [ 20.146015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 20.146022] Bluetooth: BNEP filters: protocol multicast > [ 20.146038] Bluetooth: BNEP socket layer initialized > [ 20.221992] lp: driver loaded but no devices found > [ 20.228661] ppdev: user-space parallel port driver > [ 20.731698] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 20.752609] r8169 0000:03:00.2: firmware: agent loaded > rtl_nic/rtl8411-1.fw into memory > [ 20.822261] r8169 0000:03:00.2 eth0: link down > [ 20.822302] r8169 0000:03:00.2 eth0: link down > [ 20.822344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 20.947321] input: ACPI Virtual Keyboard Device as > /devices/virtual/input/input11 > [ 22.480627] r8169 0000:03:00.2 eth0: link up > [ 22.480641] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 36.659044] wlan0: authenticate with 00:0b:86:21:ea:a0 > [ 36.690131] wlan0: send auth to 00:0b:86:21:ea:a0 (try 1/3) > [ 36.692427] wlan0: authenticated > [ 36.692594] rtl8723ae 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not > supported by the AP > [ 36.692600] rtl8723ae 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not > supported by the AP > [ 36.693860] wlan0: associate with 00:0b:86:21:ea:a0 (try 1/3) > [ 36.703882] wlan0: RX AssocResp from 00:0b:86:21:ea:a0 (capab=0x11 > status=0 aid=1) > [ 36.703987] wlan0: associated > [ 36.704024] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 45.716098] wlan0: deauthenticating from 00:0b:86:21:ea:a0 by local > choice (reason=3) > [ 45.740388] cfg80211: Calling CRDA to update world regulatory domain > [ 45.757023] cfg80211: World regulatory domain updated: > [ 45.757039] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 45.757054] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 45.757065] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 45.757081] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 45.757091] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 45.757099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 91.457926] usb 3-1.1: new high-speed USB device number 3 using ehci-pci > [ 91.639796] usb 3-1.1: New USB device found, idVendor=5986, > idProduct=0400 > [ 91.639804] usb 3-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 91.639809] usb 3-1.1: Product: BisonCam, NB Pro > [ 91.639812] usb 3-1.1: Manufacturer: Bison > [ 91.692980] media: Linux media interface: v0.10 > [ 91.697012] Linux video capture interface: v2.00 > [ 91.703384] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0400) > [ 91.708571] input: BisonCam, NB Pro as > /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input12 > [ 91.708734] usbcore: registered new interface driver uvcvideo > [ 91.708738] USB Video Class driver (1.1.1) > > ** Model information > sys_vendor: CLEVO CO. > product_name: W55xEU > product_version: Not Applicable > chassis_vendor: No Enclosure > chassis_version: N/A > bios_vendor: American Megatrends Inc. > bios_version: 4.6.5 > board_vendor: CLEVO CO. > board_name: W55xEU > board_version: D02 > > ** Loaded modules: > uvcvideo > videobuf2_vmalloc > videobuf2_memops > videobuf2_core > videodev > media > parport_pc > ppdev > lp > parport > bnep > rfcomm > pci_stub > vboxpci(O) > cpufreq_stats > cpufreq_userspace > cpufreq_powersave > cpufreq_conservative > vboxnetadp(O) > vboxnetflt(O) > vboxdrv(O) > binfmt_misc > uinput > nfsd > auth_rpcgss > nfs_acl > nfs > lockd > dns_resolver > fscache > sunrpc > ext2 > loop > fuse > joydev > snd_hda_codec_hdmi > snd_hda_codec_via > iTCO_wdt > iTCO_vendor_support > arc4 > btusb > bluetooth > rtl8723ae > rtlwifi > mac80211 > coretemp > cfg80211 > kvm_intel > rfkill > snd_hda_intel > kvm > snd_hda_codec > snd_hwdep > snd_pcm > snd_page_alloc > snd_seq > microcode > snd_seq_device > wmi > snd_timer > rtsx_pci_ms > pcspkr > i2c_i801 > psmouse > snd > lpc_ich > memstick > evdev > serio_raw > i915 > acpi_cpufreq > drm_kms_helper > drm > mperf > i2c_algo_bit > i2c_core > soundcore > battery > video > mei > ac > processor > button > ext4 > crc16 > jbd2 > mbcache > dm_crypt > dm_mod > sg > sr_mod > sd_mod > cdrom > crc_t10dif > rtsx_pci_sdmmc > mmc_core > crc32c_intel > r8169 > mii > rtsx_pci > mfd_core > ghash_clmulni_intel > aesni_intel > aes_x86_64 > thermal > thermal_sys > ablk_helper > cryptd > xts > lrw > ahci > gf128mul > libahci > ehci_pci > libata > xhci_hcd > ehci_hcd > scsi_mod > usbcore > usb_common > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM > Controller [8086:0154] (rev 09) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > > 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core > processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA > controller]) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 45 > Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at f000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: <access denied> > Kernel driver in use: i915 > > 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 > [XHCI]) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 40 > Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: xhci_hcd > > 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 > Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 44 > Region 0: Memory at f7d1b000 (64-bit, non-prefetchable) [size=16] > Capabilities: <access denied> > Kernel driver in use: mei > > 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if > 20 [EHCI]) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ehci-pci > > 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset > Family High Definition Audio Controller [8086:1e20] (rev 04) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 46 > Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: f7c00000-f7cfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f7200000-f7bfffff > Prefetchable memory behind bridge: 00000000f0a00000-00000000f13fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: f6800000-f71fffff > Prefetchable memory behind bridge: 00000000f0000000-00000000f09fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if > 20 [EHCI]) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ehci-pci > > 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC > Controller [8086:1e57] (rev 04) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Physical Slot: 1 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > Kernel driver in use: lpc_ich > > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family > 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI > 1.0]) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Physical Slot: 1 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 43 > Region 0: I/O ports at f0b0 [size=8] > Region 1: I/O ports at f0a0 [size=4] > Region 2: I/O ports at f090 [size=8] > Region 3: I/O ports at f080 [size=4] > Region 4: I/O ports at f060 [size=32] > Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K] > Capabilities: <access denied> > Kernel driver in use: ahci > > 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family > SMBus Controller [8086:1e22] (rev 04) > Subsystem: CLEVO/KAPOK Computer Device [1558:0550] > Physical Slot: 1 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at f040 [size=32] > > 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE > PCIe Wireless Network Adapter [10ec:8723] > Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0726] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at e000 [size=256] > Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: rtl8723ae > > 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device > [10ec:5289] (rev 01) > Subsystem: CLEVO/KAPOK Computer Device [1558:0540] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 41 > Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: rtsx_pci > > 03:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev > 0a) > Subsystem: CLEVO/KAPOK Computer Device [1558:0540] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 42 > Region 0: I/O ports at d000 [size=256] > Region 2: Memory at f0a04000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at f0a00000 (64-bit, prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: r8169 > > > ** USB devices: > Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 003: ID 5986:0400 Acer, Inc > Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 002: ID 0bda:8723 Realtek Semiconductor Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: jessie/sid > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.9-1-amd64 (SMP w/8 CPU cores) > Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-3.9-1-amd64 depends on: > ii debconf [debconf-2.0] 1.5.50 > ii initramfs-tools [linux-initramfs-tool] 0.113 > ii kmod 9-3 > ii linux-base 3.5 > ii module-init-tools 9-3 > > Versions of packages linux-image-3.9-1-amd64 recommends: > ii firmware-linux-free 3.2 > > Versions of packages linux-image-3.9-1-amd64 suggests: > pn debian-kernel-handbook <none> > ii grub-pc 1.99-27+deb7u1 > pn linux-doc-3.9 <none> > > Versions of packages linux-image-3.9-1-amd64 is related to: > pn firmware-atheros <none> > pn firmware-bnx2 <none> > pn firmware-bnx2x <none> > pn firmware-brcm80211 <none> > pn firmware-intelwimax <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > pn firmware-iwlwifi <none> > pn firmware-libertas <none> > pn firmware-linux <none> > pn firmware-linux-nonfree <none> > pn firmware-myricom <none> > pn firmware-netxen <none> > pn firmware-qlogic <none> > pn firmware-ralink <none> > ii firmware-realtek 0.39 > pn xen-hypervisor <none> > > -- debconf information: > linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: > linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: > linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true > linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false > > -- > To unsubscribe, send mail to 716827-unsubscr...@bugs.debian.org. > -- Caio Begotti -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CABf_N6PGqoAFiZty9NaQ4JxjQjhOwXtqYNJ1gWLHiQzLb==v...@mail.gmail.com
