Package: linux-image-2.6.29-1-686
Version: 2.6.29-1
Severity: normal
File: linux-image-2.6.29
Hi,
now that firmware has been cut out of the kernel binary, of course the DRM for
r300 fails:
[ 69.137177] [drm] Loading R300 Microcode
[ 69.137182] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 69.163875] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 69.163885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
linux-image-2.6.29 should depend on (or recommend) a package with the necessary
firmware.
Thanks,
Xav
-- Package-specific info:
** Version:
Linux version 2.6.29-1-686 (Debian 2.6.29-1) (wa...@debian.org) (gcc version
4.3.3 (Debian 4.3.3-5) ) #1 SMP Tue Mar 24 23:05:52 UTC 2009
** Command line:
root=/dev/hda5 ro
** Not tainted
** Kernel log:
[ 5.622576] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.622626] usb 4-1: Product: Dell USB Keyboard Hub
[ 5.622672] usb 4-1: Manufacturer: Dell
[ 5.622834] usb 4-1: configuration #1 chosen from 1 choice
[ 5.630540] hub 4-1:1.0: USB hub found
[ 5.631519] hub 4-1:1.0: 3 ports detected
[ 5.744020] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 5.912441] usb 4-2: New USB device found, idVendor=0461, idProduct=4d15
[ 5.912494] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.912544] usb 4-2: Product: USB Optical Mouse
[ 5.912708] usb 4-2: configuration #1 chosen from 1 choice
[ 5.928787] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
[ 5.940089] generic-usb 0003:0461:4D15.0004: input,hidraw3: USB HID v1.11
Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 6.013419] usb 4-1.1: new full speed USB device using uhci_hcd and address 4
[ 6.150379] usb 4-1.1: New USB device found, idVendor=413c, idProduct=2010
[ 6.150435] usb 4-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.150490] usb 4-1.1: Product: Dell USB Keyboard Hub
[ 6.150538] usb 4-1.1: Manufacturer: Dell
[ 6.150698] usb 4-1.1: configuration #1 chosen from 1 choice
[ 6.160833] input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input4
[ 6.172094] generic-usb 0003:413C:2010.0005: input,hidraw4: USB HID v1.10
Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.2-1.1/input0
[ 6.179474] input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input5
[ 6.188063] generic-usb 0003:413C:2010.0006: input,hidraw5: USB HID v1.10
Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.2-1.1/input1
[ 6.389309] usb 4-1.3: new full speed USB device using uhci_hcd and address 5
[ 7.858328] udev: starting version 140
[ 8.829081] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.829194] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.262126] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 9.429399] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.779084] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.858181] Linux agpgart interface v0.103
[ 10.014227] agpgart-intel 0000:00:00.0: Intel E7505 Chipset
[ 10.021280] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xc8000000
[ 10.163916] intel_rng: FWH not detected
[ 10.318741] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.510868] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 12.615506] EDAC MC: Ver: 2.1.0 Mar 24 2009
[ 13.311220] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 13.324067] ACPI: Power Button (FF) [PWRF]
[ 13.324286] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
[ 13.344620] ACPI: Power Button (CM) [VBTN]
[ 16.521490] usb 4-1.3: New USB device found, idVendor=1131, idProduct=1001
[ 16.521567] usb 4-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 16.521631] usb 4-1.3: Product: ISSCBTA
[ 16.521884] usb 4-1.3: configuration #1 chosen from 1 choice
[ 17.430675] Bluetooth: Core ver 2.14
[ 17.565653] NET: Registered protocol family 31
[ 17.565711] Bluetooth: HCI device and connection manager initialized
[ 17.565769] Bluetooth: HCI socket layer initialized
[ 17.877100] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 17.877330] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 17.915760] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 17.916039] usbcore: registered new interface driver btusb
[ 18.297553] intel8x0_measure_ac97_clock: measured 54785 usecs
[ 18.297631] intel8x0: clocking to 48000
[ 20.656501] Adding 1043240k swap on /dev/hda6. Priority:-1 extents:1
across:1043240k
[ 20.906431] EXT3 FS on hda5, internal journal
[ 23.790575] fuse init (API version 7.11)
[ 23.899030] kjournald starting. Commit interval 5 seconds
[ 23.904180] EXT3 FS on hdb1, internal journal
[ 23.904265] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.956400] kjournald starting. Commit interval 5 seconds
[ 23.956556] EXT3 FS on hda7, internal journal
[ 23.956641] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.328377] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 33.017222] NET: Registered protocol family 10
[ 33.018323] lo: Disabled Privacy Extensions
[ 34.426005] platform microcode: firmware: requesting intel-ucode/0f-02-09
[ 34.562571] platform microcode: firmware: requesting intel-ucode/0f-02-09
[ 34.578653] platform microcode: firmware: requesting intel-ucode/0f-02-09
[ 34.593728] platform microcode: firmware: requesting intel-ucode/0f-02-09
[ 34.644118] Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>,
Peter Oruba
[ 36.284553] evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output
to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
[ 40.851965] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.852055] apm: disabled - APM is not SMP safe.
[ 43.280012] eth0: no IPv6 routers present
[ 45.550246] RPC: Registered udp transport module.
[ 45.550309] RPC: Registered tcp transport module.
[ 45.992804] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 46.164238] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 46.185737] NFSD: starting 90-second grace period
[ 61.571268] Bluetooth: L2CAP ver 2.11
[ 61.571325] Bluetooth: L2CAP socket layer initialized
[ 61.743994] Bluetooth: RFCOMM socket layer initialized
[ 61.744153] Bluetooth: RFCOMM TTY layer initialized
[ 61.744221] Bluetooth: RFCOMM ver 1.10
[ 62.939838] hci_cmd_task: hci0 command tx timeout
[ 65.232484] lp0: using parport0 (interrupt-driven).
[ 65.434778] ppdev: user-space parallel port driver
[ 67.695641] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 67.885651] [drm] Initialized drm 1.1.0 20060810
[ 67.953599] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 68.599956] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 68.599984] agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode
[ 68.600088] pci 0000:01:00.0: putting AGP V3 device into 4x mode
[ 69.137107] [drm] Setting GART location based on new memory map
[ 69.137177] [drm] Loading R300 Microcode
[ 69.137182] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 69.163875] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 69.163885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
** Loaded modules:
Module Size Used by
binfmt_misc 7168 1
radeon 102684 0
drm 133260 1 radeon
ppdev 6224 0
lp 7872 0
rfcomm 29636 2
l2cap 17072 9 rfcomm
nfsd 186396 13
lockd 57840 1 nfsd
nfs_acl 2624 1 nfsd
auth_rpcgss 31344 1 nfsd
sunrpc 161964 13 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3900 1 nfsd
battery 5832 0
speedstep_lib 4172 0
cpufreq_powersave 1276 0
cpufreq_userspace 2748 0
cpufreq_stats 3588 0
cpufreq_conservative 5456 0
microcode 11148 0
ipv6 232468 38
fuse 48352 1
btusb 10156 2
snd_intel8x0 25900 0
bluetooth 46052 7 rfcomm,l2cap,btusb
snd_ac97_codec 91260 1 snd_intel8x0
ac97_bus 1444 1 snd_ac97_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62704 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
psmouse 36628 0
joydev 8560 0
serio_raw 4544 0
evdev 8160 12
snd_seq_dummy 2368 0
snd_seq_oss 24756 0
snd_seq_midi 5448 0
snd_rawmidi 18544 1 snd_seq_midi
button 5672 0
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
snd_seq 42120 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
e7xxx_edac 4768 0
snd_timer 17808 2 snd_pcm,snd_seq
edac_core 34680 1 e7xxx_edac
snd_seq_device 6108 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 8104 0
shpchp 26836 0
snd 48420 10
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rng_core 3644 0
intel_agp 22548 1
agpgart 30624 2 drm,intel_agp
pci_hotplug 24464 1 shpchp
i2c_core 20828 2 drm,i2c_i801
pcspkr 2092 0
dcdbas 6728 0
soundcore 6204 1 snd
snd_page_alloc 8036 2 snd_intel8x0,snd_pcm
parport_pc 22020 1
parport 30868 3 ppdev,lp,parport_pc
ext3 107180 3
jbd 42500 1 ext3
mbcache 7180 1 ext3
dm_snapshot 16716 0
hid_logitech 6656 0
ff_memless 4264 1 hid_logitech
usbhid 29132 1 hid_logitech
hid 34260 2 hid_logitech,usbhid
ide_cd_mod 25532 0
cdrom 29804 1 ide_cd_mod
ide_gd_mod 18904 6
ide_pci_generic 3408 0
ata_generic 4316 0
libata 148892 1 ata_generic
scsi_mod 132076 1 libata
firewire_ohci 18620 0
uhci_hcd 19392 0
piix 5584 4
firewire_core 33504 1 firewire_ohci
crc_itu_t 1796 1 firewire_core
ide_core 91820 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,piix
e1000 101696 0
ehci_hcd 29836 0
usbcore 124872 5 btusb,usbhid,uhci_hcd,ehci_hcd
thermal 15092 0
processor 39540 1 thermal
fan 4104 0
thermal_sys 10272 3 thermal,processor,fan
dm_mirror 12160 0
dm_region_hash 10632 1 dm_mirror
dm_log 8588 2 dm_mirror,dm_region_hash
dm_mod 49048 3 dm_snapshot,dm_mirror,dm_log
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7505 Memory Controller Hub
[8086:2550] (rev 03)
Subsystem: Dell Device [1028:012d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation E7505/E7205 PCI-to-AGP Bridge
[8086:2552] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff800000-ff9fffff
Prefetchable memory behind bridge: d0000000-efffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation E7505 Hub Interface B PCI-to-PCI
Bridge [8086:2553] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff400000-ff7fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:012d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa20800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: ff200000-ff3fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge [8086:24c0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller
[8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 01)
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at cc80 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Region 1: I/O ports at cc40 [size=64]
Region 2: Memory at ffa20400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa20000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon
9600] [1002:4152] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:4038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff800000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600]
(Secondary) [1002:4172]
Subsystem: Giga-byte Technology Device [1458:4039]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev
04) (prog-if 20 [IO(X)-APIC])
Subsystem: Dell Device [1028:012d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ff4ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
[8086:1460] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff7fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev
04) (prog-if 20 [IO(X)-APIC])
Subsystem: Dell Device [1028:012d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ff4fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
[8086:1460] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=48
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:0e.0 Ethernet controller [0200]: Intel Corporation 82545EM Gigabit Ethernet
Controller (Copper) [8086:100f] (rev 01)
Subsystem: Dell Device [1028:012d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at ff6e0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at dcc0 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
05:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394
Controller (Link) [104c:8020] (prog-if 10 [OHCI])
Subsystem: Ads Technologies Inc Device [1421:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at ff2ff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ff2f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-1-686 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-1-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.1 tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.29-1-686 recommends:
ii libc6-i686 2.9-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.29-1-686 suggests:
ii grub 0.97-51 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
linux-image-2.6.29-1-686/preinst/abort-overwrite-2.6.29-1-686:
linux-image-2.6.29-1-686/preinst/elilo-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/bootloader-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/depmod-error-initrd-2.6.29-1-686: false
linux-image-2.6.29-1-686/postinst/old-system-map-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/kimage-is-a-directory:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-1-686/preinst/overwriting-modules-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/initrd-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/bootloader-test-error-2.6.29-1-686:
linux-image-2.6.29-1-686/prerm/removing-running-kernel-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-1-686/postinst/old-dir-initrd-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/lilo-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/depmod-error-2.6.29-1-686: false
linux-image-2.6.29-1-686/postinst/bootloader-error-2.6.29-1-686:
linux-image-2.6.29-1-686/preinst/failed-to-move-modules-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/create-kimage-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/prerm/would-invalidate-boot-loader-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/abort-install-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/old-initrd-link-2.6.29-1-686: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
