Benh, just so you are in the loop. Friendly,
Sven Luther On Fri, Aug 27, 2004 at 11:45:07AM +0200, Francesco P. Lovergine wrote: > Package: kernel > Severity: normal > > 2.4 series radeonfb (1.8-benh) works perfectly (also modular). > 2.6 series new radeonfb never worked (since 2.6.0 at least), it does not sync > here (laptop XSVGA). > After loading, fbset reports 1400x1050-60, as for the 2.4 version, but screen > is blank and stay in normal text mode 80x25. I need to switch on and back to > X in order to > see screen content again. That's for loading it modular of course, I have to > do yet test > for static version. > > 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility > M6 LY > > 0000:01:00.0 0300: 1002:4c59 > Subsystem: 0e11:b11b > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- > Stepping+ SERR+ FastB2B+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 2000 [size=256] > Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: <available only to root> > > In dmesg: > > Aug 18 19:06:41 localhost kernel: radeonfb: Retreived PLL infos from BIOS > Aug 18 19:06:41 localhost kernel: radeonfb: Reference=27.00 MHz (RefDiv=60) > Memory=166.00 Mhz, System=143.00 MHz > Aug 18 19:06:42 localhost kernel: radeonfb: Monitor 1 type LCD found > Aug 18 19:06:42 localhost kernel: radeonfb: EDID probed > Aug 18 19:06:42 localhost kernel: radeonfb: Monitor 2 type no found > Aug 18 19:06:42 localhost kernel: radeonfb: panel ID string: Samsung > LTN150P1-L02 > Aug 18 19:06:42 localhost kernel: radeonfb: detected LVDS panel size from > BIOS: 1400x1050 > Aug 18 19:06:42 localhost kernel: radeondb: BIOS provided dividers will be > used > Aug 18 19:06:42 localhost kernel: radeonfb: Power Management enabled for > Mobility chipsets > Aug 18 19:06:42 localhost kernel: radeonfb: ATI Radeon LY DDR SGRAM 32 MB > > This is with current 2.6.8 in debian, but that's true with _all_ other > previous versions (2.6.0+). > > fbset return right mode, as set in /etc/fb.modes too: > > mode "1400x1050-60" > # D: 108.003 MHz, H: 63.983 kHz, V: 60.191 Hz > geometry 1400 1050 1400 1050 8 > timings 9259 136 40 10 0 112 3 > rgba 6/0,6/0,6/0,0/0 > hsync high > vsync high > accel true > endmode > > I tried to fbset explicitly the mode after module loading too, but without > results. > I'll return results with static compiled in module when possible. > > > -- System Information: > Debian Release: 3.1 > APT prefers unstable > APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') > Architecture: i386 (i686) > Kernel: Linux 2.4.27-1-686 > Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] > > > -- > Francesco P. Lovergine > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
