On Mon, Sep 13, 2004 at 10:44:32AM +0200, Francesco P. Lovergine wrote: > On Sun, Sep 12, 2004 at 09:00:19AM +0200, Sven Luther wrote: > > > > > I'm having the same problem on a HP Pavilion zt3020EA, which has an ATI > > > Radeon 9000 chipset. Native res is 1280x800. Again blank screen with > > > cursor moving on it, and all working fine in 2.4 or X. The problem > > > apparently > > > is the same so I'm sending a followup for that. > > > > Mmm, Can you clarify if it works fine in 1280x800 mode or not ? I have some > > doubts about the wisdom of using an LCD with bigger than native resolution. > > > > That's the native resolution and looks very good. This is one of those > new displays in 16/9 ratio, used for video playing. As well as 1400x1050 > is the native resolution for the other box which has a SXVGA unit. > All resolutions are stolen from those detected and used under 2.4. > The old kernel starts directly in the high resolution mode. > BTW, I'm using the same resoltion under X which also appears as the best > one for font and textures rendering.
Ok, so you have two laptops, one with 1400x1050 native resolution and the other with 1280x800 native resolution, exact ? In both case, running the fbdev in native resolution worked for 2.4 radeonfb, but not for 2.6 radeonfb, and in both case X is working fine. Furthermore, your laptops displays are not-DDC capable, and thus new_radeonfb is doing strange things with monitor timings, and is failing to setup your native panel mode. Benh, any insight on this ? Friendly, Sven Luther

