Am Mon, den 01.12.2003 schrieb Robert Staudinger um 14:27: > INSTALL REPORT > > Debian-installer-version: 2003-11-29 > http://www.soziologie.ch/~steinlin/d-i/powerpc/sarge-powerpc-netinst.iso > uname -a: Linux localhost.localdomain 2.4.20-8d_owen_aty128 #1 Wed Jul 16 13:04:19 > CEST 2003 ppc ppc ppc GNU/Linux > Date: 2003-12-01 12:00 > Method: Install from CD Boot off CD > > Machine: late 2001 iBook2 > Processor: G3 600MHz > Memory: 384MB > Root Device: IBM 40GB ide (not 100% sure) > > ===== > Partition map (with 512 byte blocks) on '/dev/hda' > #: type name length base ( size ) > 1: Apple_partition_map Apple 63 @ 1 > 2: Apple_Bootstrap*untitled 2048 @ 64 ( 1.0M) > 3: Apple_UNIX_SVR2 untitled 10240000 @ 2112 ( 4.9G) > 4: Apple_UNIX_SVR2 swap 1228800 @ 10242112 (600.0M) > 5: Apple_UNIX_SVR2 untitled 66669248 @ 11470912 ( 31.8G) > > Device block size=512, Number of Blocks=78140160 (37.3G) > DeviceType=0x0, DeviceId=0x0 > Drivers- > 1: 23 @ 64, type=0x1 > 2: 36 @ 118, type=0xffff > 3: 21 @ 192, type=0x701 > 4: 34 @ 246, type=0xf8ff > ===== > Want to mount 4: as swap and 5: as / > > Output of lspci: > 00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP > 00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x > (rev 02) > 10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI > 10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O > 10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB > 10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB > 20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI > 20:0e.0 Class ffff: Apple Computer Inc. UniNorth/Pangea FireWire (rev ff) > 20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) > > Base System Installation Checklist: > > Initial boot worked: [O] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [O] > Partition hard drives: [O] > Create file systems: [O] > Mount partitions: [O] > Install base system: [E] > Install boot loader: [ ] > Reboot: [ ] > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Comments/Problems: > > After selecting the kernel the progress-bar started but the kernel couldn't be > installed and the kernel-selection came again. No way to install kernel and > continue.
This image has a know and fixed bug, that kernel-installer tries to install initrd-tools, which is not on the cd and is not needed by the current powerpc kernels. Unfortunately nobody seems to have a more recent powerpc image around and gluck is still down. You could try the cdrom-udeb-all-none.img. this one should not have this bug. Gaudenz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
