INSTALL REPORT Debian-installer-version: 2003-11-29 http://www.soziologie.ch/~steinlin/d-i/powerpc/sarge-powerpc-netinst.iso uname -a: Linux localhost.localdomain 2.4.20-8d_owen_aty128 #1 Wed Jul 16 13:04:19 CEST 2003 ppc ppc ppc GNU/Linux Date: 2003-12-01 12:00 Method: Install from CD Boot off CD
Machine: late 2001 iBook2 Processor: G3 600MHz Memory: 384MB Root Device: IBM 40GB ide (not 100% sure) ===== Partition map (with 512 byte blocks) on '/dev/hda' #: type name length base ( size ) 1: Apple_partition_map Apple 63 @ 1 2: Apple_Bootstrap*untitled 2048 @ 64 ( 1.0M) 3: Apple_UNIX_SVR2 untitled 10240000 @ 2112 ( 4.9G) 4: Apple_UNIX_SVR2 swap 1228800 @ 10242112 (600.0M) 5: Apple_UNIX_SVR2 untitled 66669248 @ 11470912 ( 31.8G) Device block size=512, Number of Blocks=78140160 (37.3G) DeviceType=0x0, DeviceId=0x0 Drivers- 1: 23 @ 64, type=0x1 2: 36 @ 118, type=0xffff 3: 21 @ 192, type=0x701 4: 34 @ 246, type=0xf8ff ===== Want to mount 4: as swap and 5: as / Output of lspci: 00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP 00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) 10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI 10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O 10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB 10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB 20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI 20:0e.0 Class ffff: Apple Computer Inc. UniNorth/Pangea FireWire (rev ff) 20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: After selecting the kernel the progress-bar started but the kernel couldn't be installed and the kernel-selection came again. No way to install kernel and continue. Thanks, Robert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
