Package: installation-reports
INSTALL REPORT
Debian-installer-version: (the one advertised on debian-devel-announce) downloaded
around November 8
uname -a: Linux localhost 2.4.22-1-686 #6 Sat Oct 4 14:09:08 EST 2003 i686 GNU/Linux
Date: Mon Nov 17 21:46:48 EST 2003
Method: Sarge business card ISO, network installed, transparently proxied.
Machine: Noname PIV clone, MSI mainboard, NVidia video, IDE, yadda yadda
Processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 0
model name : Intel(R) Pentium(R) 4 CPU 1500MHz
stepping : 7
cpu MHz : 1503.433
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3001.54
Memory:
total used free shared buffers cached
Mem: 256672 147444 109228 0 14172 108928
-/+ buffers/cache: 24344 232328
Swap: 0 0 0
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 7295 58597056 7 HPFS/NTFS
/dev/hda2 * 7296 7356 489982+ 83 Linux
/dev/hda3 7357 7372 128520 82 Linux swap
/dev/hda4 7373 14593 58002682+ 8e Linux LVM
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 474472 197419 252554 44% /
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev
b2)
03:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
03:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
03:02.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Install went swimmingly. Main comments are:
* The initial net install gave me no option but to download from
ftp.au.debian.org, which from Australia is slooow :-(
* The generated LILO configuration is rather minimal and in particular doesn't
pause much to let you press Shift to interrupt it
* I didn't get a lot of choice in whether or not I was going to get pcmcia-cs
installed, and it's pointless on my system
other than that, it was really really straightforward. It seemed to completely
bypass network configuration presumably because it got a DHCP lease
successfully. Only complaint here is I didn't get an opportunity to set the
hostname, and localhost is so Red Hat...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
