On Monday 07 July 2008, Daniel Dickinson wrote: > Frans Pop <[EMAIL PROTECTED]> wrote: > > If you know of any way we could check that the driver is being loaded > > but loading is not complete, then we could possibly add a pause. > > > > If the syslog of the installation clearly shows the progress of the > > loading process, then please send us that (gzipped). > > It does and I have included it
Thanks. Please test using this image: http://people.debian.org/~fjp/tmp/d-i/mini-megaraid.iso It should now pause during hardware detection to wait for the megaraid reset to complete. It does not show any specific progress messages yet (except a few in the syslog), but I will add that if this works. If it does not work, please uncomment the line '#set -x' near the top of /bin/hw-detect and send the resulting syslog (or try fixing the problem yourself). The one thing that could still be missing is that it does wait for megaraid reset to complete, but not for the detection of scsi devices that follows it, although I would expect that to work. If that happens, try increasing the 'sleep 1' just before 'break' in the function wait_megaraid_complete in /bin/hw-detect to 'sleep 15'. If it works, please also test with the following change. Again in the function wait_megaraid_complete change the line 'local wait=300' to 'local wait=10'. I'd expect the new delay to "time out" too early with that and thus show the old behavior. The changes I mention above should of course be made before hw-detect gets run, e.g. while the language selection screen is being displayed. Please send any syslogs from these tests (gzipped!). I'd appreciate if you could do these tests within the next few days! > > Knowing the duration before modprobe returns is definitely > > interesting. > > Is it possible megaraid_mbox is loaded before selecting the detect disk > menu item? If you're using a regular CD image, then yes. That should not happen with the above image though. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
