---------- Forwarded message ---------- From: Brian Morris <[EMAIL PROTECTED]> Date: Apr 29, 2007 10:55 PM Subject: Re: mac status, was Re: time setting on 950 To: Finn Thain <[EMAIL PROTECTED]>
hi, i think an alternative to ntpdate: date -s "`rsh $buildhost date`" where buildhost is your nfs/ distcc server, or whatever. then you can sync clocks on your local net, at least. _______ also, i looked at those status pages. one note: i have experience the machine will not shutdown or halt, but hangs. this is more annoying on the quadra630 which has no off switch, the only way to stop it is to reboot into macos. but my performa475/quadra605 can be switch off (i have not tested etch there yet). i do not experience the clock problem forcing fsck. this only happen if people have ext3 on their root partition ? anyway i have a single debian partition of ext2 and i don't get fsck every time. i only use ext3 when i have a separate partion for more room such as home or source. the story on ppc list was debian reccomends against ext3 root (or anything other than ext2). ________ one question: so if sonic driver is ok now, would that be a better / faster one than the Asante or Farollon chips. have one asante card now, between two machines. could buy a sonic. costs a little bit more. _________ one more comment on RAM i think 32MB is that OK ? i found that sarge could boot with 20 but it was not happy. to run emacs (xemacs = better) say. i think i need at least 64 for etch, bare minimum. brian On 4/19/07, Finn Thain <[EMAIL PROTECTED]> wrote:
On Thu, 19 Apr 2007, Stephen R Marenka wrote: > On Fri, Apr 20, 2007 at 01:12:39AM +0200, Riccardo wrote: > > Hi, > > > > I tried finn's 2.6 kernel and I see ther eis proble, on Q950 at least. > > I hope that the scsi can be improved and that the IIfx will work soon. > > One f the nasty little things that is missing is the RTC support: the > > machiine boots always with "epoch". While the system time can be stet > > later, it is boring and also it means that initial file system check > > act strangely often. > > > > 2.2 kernel worked: is there some driver not working anymore? > > It worked on a 950? It didn't on mine. > > > or was there some smart trick to get the date passed by penguin? > > I go with crontab and ntpdate (ntpdate-debian). If ntpd can't keep sync (?) I guess you'd have to. I'd be a bit worried about back-stepping the clock during make, though. > > In either case it would be nice to support it under 2.6 > > Ack. :) Indeed. I guess it is the most important bug to fix of all the outstanding bugs. I've finally put up the mac status info that I have collected. http://www.mac.linux-m68k.org/status/ ...there's more on the Q950 issues there. -f > Peace, > > Stephen > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
