On Fri, 2006-11-10 at 23:11 -0800, Brian Morris wrote: > > On such system I hade install emile - from my bootable cdrom - and now > > Debian can boot himself directily from his disk - no more need of useing > > of Penguin -. > > you are using emile then with 2.6 kernel ? The system has 2.6.17-2-mac , and was installed directly - w/ floppies - from a modified cdrom debian-testing-m68k-binary1.iso, - style emile bootable mac cdrom :) - au passage je vous salut ! - > can you tell if the system is any more stable, or any issues improve ? Watchdog time out is still present, cause of to hwclock access issue, > (be sure to update when the new build comes through) > can you try 2.6.18 from unstable ? >From yesterday the system has 2.6.18-2-mac -2.6.18_4 -, but the hwclock access issue is still present > I never did get 17 to work at all > for me, because of disk driver problems (my quadra630 has ide and > my macII has an older scsi controller. > > how are you connecting when you use ethernet, the system is stable only with ethx desabled ! > do you have a local > hub or switch. have you tried directly connecting two linux boxes with > a cross-over cable (anybody), this forces a simpler half-duplex connection. > (although on my newer machines full duplex is faster with these i have > not seen it, and it may be more stable. at least the one time i tried to > use the hub was the one time i got a crash after about 1 hour uptime) This system is standalone, for the moment, I use only cdrom for his needs.
I tried on, a kernel compilation directly from linux-2.6_2.6.18-orig.tar.gz, but it is stoped in about 6 minutes with same errors. By the way, there is a basic kernel's config for (quadra840av) macs ? regards, eugen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
