Hi Corinna, >> I ran your commands to recreate /etc/passwd and /etc/group > >Ideally passwd and group are set to "db" only for this, just to be sure. > >> (they now contain 1 line and 3 lines respectively - before it had >> about 10 & 21 lines in each) > >Hang on. getent group $(id -G) only returns three lines? That's a bit >weird. How does the output of `id' look like?
I seem to get a couple of answers (see my response to Andrey). I just ran it now and got 83 lines - it took a few mins. >> To create a bash terminal window (from cmd) takes about 5-6 minutes. >> cmd /v:on /c "echo !TIME! & C:\cygwin64\bin\mintty.exe /bin/echo "test" & >> echo !TIME!" >> 11:01:20.27 >> 11:06:59.78 = 5:39.51 > >With a running cygserver, how long did it take the second time? About 1/10 of the second. >Can you please check again with the cygwin test release 1.7.35-0.2? > >Two tests: > >- Set passwd and group to "db" only >- Set passwd to "files db" and group to "db" >- Both set to "files db" Ok, running 1.7.35-0.2 cmd /v:on /c "echo !TIME! & C:\cygwin64\bin\mintty.exe /bin/echo "test" & echo !TIME!" 12:31:08.46 12:31:09.93 = 0:01.47 Settings = Both = "db" About 1.65 seconds Settings = group = "db", passwd = "files db" About 1.65 seconds Settings = group = "files db", passwd = "db" About 1.50 seconds Settings = group = "files db", passwd = "files db" About 1.45 seconds >I think I'm going to create another test version which adds debug output >to get timings for the LookupAccountName and LDAP calls. The long time >this takes in some environments is really puzzeling me. > >Would you be willing to run such a test if I provide you with a debug >augmented Cygwin DLL? Yes, I can do that.
