Thanks, Kevin. If it’s handy, please forward. Much appreciated.
From: Kevin Wright via CnC-List <cnc-list@cnc-list.com> Sent: Tuesday, September 06, 2022 3:56 PM To: Stus-List <cnc-list@cnc-list.com> Cc: Kevin Wright <kcwright...@gmail.com> Subject: Stus-List Re: Fwd: C&C 37 Hey Matt, If Stu doesn't have what you're looking for let me know, I made up some artwork last year in Illustrator (vector) I can send you. Kevin Kevin Wright Raven Landfall 43 Midland ON kcwright...@gmail.com <mailto:kcwright...@gmail.com> On Tue, Sep 6, 2022 at 2:36 PM Matthew via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Stu: Hope all is well. My 42 Custom has the main traveler mounted over the companionway, much like my 34 did. When C&C made boats with this type of arrangement, the deck has molded fiberglass housings on both sides of the companionway for mounting the traveler track. I was using the outboard end of these fiberglass housings for my PA Fish and Boat Commission registration stickers, which fit very nicely. Unfortunately, the PA boat police don’t like that location and demanded that the stickers be placed at the bow. As a result, I’m thinking about ordering a couple stickers to place on the ends of the fiberglass housings with the C&C logo. I’m going to adjust it to put “42 Custom” underneath. You don’t sell anything like that, do you? Assuming you don’t, below is a similar logo you sent re: a C&C 37 awhile back, and attached is artwork that I copied from a lister’s e-mail. The problem with the artwork is that it gets jagged edges when enlarged. Do you have any logo artwork that stays intact when enlarged? Please advise. Thanks. Matt <https://dl.airtable.com/.attachments/99435765c14508096f8a39194554552e/86880855/2022-04-0215.41.58.jpg>
