Hey Matt, If Stu doesn't have what you're looking for let me know, I made up some artwork last year in Illustrator (vector) I can send you. Kevin
*Kevin Wright* Raven Landfall 43 Midland ON kcwright...@gmail.com On Tue, Sep 6, 2022 at 2:36 PM Matthew via CnC-List <cnc-list@cnc-list.com> wrote: > Stu: > > > > Hope all is well. > > > > My 42 Custom has the main traveler mounted over the > companionway, much like my 34 did. When C&C made boats with this type of > arrangement, the deck has molded fiberglass housings on both sides of the > companionway for mounting the traveler track. I was using the outboard end > of these fiberglass housings for my PA Fish and Boat Commission > registration stickers, which fit very nicely. Unfortunately, the PA boat > police don’t like that location and demanded that the stickers be placed at > the bow. As a result, I’m thinking about ordering a couple stickers to > place on the ends of the fiberglass housings with the C&C logo. I’m going > to adjust it to put “42 Custom” underneath. You don’t sell anything like > that, do you? Assuming you don’t, below is a similar logo you sent re: a > C&C 37 awhile back, and attached is artwork that I copied from a lister’s > e-mail. The problem with the artwork is that it gets jagged edges when > enlarged. Do you have any logo artwork that stays intact when enlarged? > > > > Please advise. Thanks. > > > > Matt > > > <https://dl.airtable.com/.attachments/99435765c14508096f8a39194554552e/86880855/2022-04-0215.41.58.jpg> > > > <https://dl.airtable.com/.attachments/99435765c14508096f8a39194554552e/86880855/2022-04-0215.41.58.jpg> > > >
