Those videos don’t stop. I had to reboot to get rid of them On Mon, Oct 4, 2021 at 3:23 PM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote:
> Here are a couple videos of me pulling the spar on my 39 about 18 years > ago, the first one it gets dark towards the end, done with one crew and my > girlfriend at the time. > > The second you will have to cock your head sideways (sorry), this done > with just me and the same woman, but it only takes us 2 minutes and 30 > seconds to do the deed each time, and the music is good. > > > > Worth exactly what you paid for it. > > > > https://youtu.be/cpz1hAODZAY > > > > https://www.youtube.com/watch?v=icWBBccAKY8 > > > > > > > > Bill Coleman > > Entrada, Erie, PA > > > > > > *From:* Hoyt, Mike via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Monday, October 04, 2021 8:36 AM > *To:* 'Stus-List' > *Cc:* Hoyt, Mike > *Subject:* Stus-List Re: Mast in and out > > > > I agree with Joe > > > > Although we do it ourselves and do it every year we also need to have a > group of people who come on their own time. For these reasons I do > everything I can before they arrive to use the least amount of their time > that is necessary. Much would be the same if you pay to have someone else > do it as otherwise the Rigger would have to do these tasks that are very > time consuming. > > > > Prior to the day of un-stepping the mast these are the things that I do > and that you can also do: > > > > - Have all masthead gear removed. Wind transducer, windex, VHF > antenna. Send someone aloft to do this > > - Have boom removed. > > - De-rig all running rigging. Have the halyards no longer > running thru any blocks attached to the deck and coiled neatly and attached > to mast > > - Un-pin all shrouds and stays. Lubricate all turn buckles. > Take a turn off of each to ensure they are not seized > > > > These few steps take a lot of time but perhaps you can contact the people > un-stepping the mast and see if doing this on un-stepping and then you > doing the re-rigging would save on your quote. > > > > I know that we have worked on a lot of masts. Some owners are far more > prepared than others and as a result the job takes less than half the time > > > > Mike Hoyt > > Persistence > > Halifax, NS > > > > > > *From:* Joe Della Barba via CnC-List <cnc-list@cnc-list.com> > *Sent:* October 3, 2021 3:30 PM > *To:* 'Stus-List' <cnc-list@cnc-list.com> > *Cc:* j...@dellabarba.com > *Subject:* Stus-List Re: Mast in and out > > > > This is not routine here in Maryland, my mast has been out exactly one > time. I think it was $160 out and $160 in, which was the hourly crane > charge back then. I had all the sails off, wiring disconnected, forestay > and backstay off replaced by halyards, boom off, and the shrouds ready to > go. The crane was literally done in about 10 minutes. If you paid the yard > to do everything I can well see it hitting $1000. > > > > Joe Della Barba > > Coquina C&C 35 MK I > > Kent Island MD USA > > > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
