Does the cables have to cross inside the pedestal than on ideler on it respective side Does someone have detailed pictures of that
On Thu, Aug 12, 2021 at 4:26 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > Fortunately, on my boat, the quadrant is very open and accessible under a > removable panel in the rear cockpit floor. That part should be easy. The > only challenge (LOL- famous last words) looks like feeding the cables > through the pedestal. Dave > > David Knecht > Rear Commodore > Thames Yacht Club > New London, CT > > > > On Aug 12, 2021, at 4:09 PM, John and Maryann Read via CnC-List < > cnc-list@cnc-list.com> wrote: > > David > > All good comments here. If your set up similar to mine, the hardest part > is crawling all the way aft under the cockpit floor to undo old cables from > quadrant and then reattaching and adjusting the new. The cables enter the > quadrant on each side then take a hard turn into the rear of the quadrant > crossing the center line. That turn is frequently a cable failure point. > Mine had several broken strands at that point. I did mine several years > ago as part of dropping the rudder to remedy some very old post grease that > had hardened making steering very difficult and to rebuild rudder due to > water intrusion. All DIY. Not that difficult in concept but the execution > is well another story. > > > John and Maryann (in memorium) > Legacy III > 1982 C&C 34 > Noank, CT > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
