This is a terrific documentation of your project Mike. I hope I never have to use it! I hate being in that hole and I would have to cut out one of my Propane lockers to do it. Kids are now old enough to know they don't have to go down there just because I tell them to anymore 🙁 Wade Oh Boy C&C 33 MKII
On Tue, Mar 30, 2021, 08:24 Hoyt, Mike via CnC-List, <cnc-list@cnc-list.com> wrote: > I am copying my friend Phil who manufactured rudder bushings for > Persistence. We also had some wear on the post just above the rudder that > made it slightly out of round and induced fore / aft play. Phil may be > able to comment on how he took the measurements and manufactured the > bushings and the product/process he used to build up the post and return it > to its original specifications. The Frers 33 is very similar to C&C33-2 and > of the same vintage so the process and products would be very similar > > > > Persistence rudder is back in the boat and steering connected and play is > gone. A link to the project can be found here > http://www.hoytsailing.com/RudderBearing.htm > > > > Mike Hoyt > > Persistence > > Halifax, NS > www.hoytsailing.com > > > > > > *From:* Joel Delamirande via CnC-List <cnc-list@cnc-list.com> > *Sent:* March 30, 2021 10:04 AM > *To:* Stus-List <cnc-list@cnc-list.com> > *Cc:* Joel Delamirande <joel.delamira...@gmail.com> > *Subject:* Stus-List Re: Rudder post bearing for 33ii > > > > Does south shore yacht still have bearing for the rudder? > > I need one for mine mk1 30 1973 > > > > On Tue, Mar 30, 2021 at 8:45 AM Paul Fountain via CnC-List < > cnc-list@cnc-list.com> wrote: > > Is this the delrin ring around the top of the rudder post ? When ours gave > up (split) I got one from SouthShore that was a good fit, had to get the > pin also as the old one was bent before we bought Perception. Going to be > time for another soon I am sure ... so interested in what you find. > > -----Original Message----- > From: Dave S via CnC-List <cnc-list@cnc-list.com> > Sent: March 29, 2021 9:16 PM > To: C&c Stus List <cnc-list@cnc-list.com> > Cc: Dave S <syerd...@gmail.com> > Subject: Stus-List Rudder post bearing for 33ii > > So, Mike and me was talkin’..... > > Both our boats have had the rudder post bearing replaced - I was > fortunate to have an almost intact original and was able to fabricate a > pretty good replacement - mike was not so lucky and has a serviceable but > temporary solution in play. > I would like to create (really, have someone more digitally capable > create) an accurate drawing and maybe make up a few of these. > My original is broken into two segments and is therefore not the best > choice as a pattern. > It is very hard to measure this accurately with the rudder post > installed. Does have a drawing or any thoughts about creating one? This > would be shared amongst the collective of course! > > Dave - 33ii > > Sent from my iPhone > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > -- > > Joel Delamirande > > *www.jdroofing.ca <http://www.jdroofing.ca>* > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu