Is this the delrin ring around the top of the rudder post ? When ours gave up (split) I got one from SouthShore that was a good fit, had to get the pin also as the old one was bent before we bought Perception. Going to be time for another soon I am sure ... so interested in what you find.
-----Original Message----- From: Dave S via CnC-List <cnc-list@cnc-list.com> Sent: March 29, 2021 9:16 PM To: C&c Stus List <cnc-list@cnc-list.com> Cc: Dave S <syerd...@gmail.com> Subject: Stus-List Rudder post bearing for 33ii So, Mike and me was talkin’..... Both our boats have had the rudder post bearing replaced - I was fortunate to have an almost intact original and was able to fabricate a pretty good replacement - mike was not so lucky and has a serviceable but temporary solution in play. I would like to create (really, have someone more digitally capable create) an accurate drawing and maybe make up a few of these. My original is broken into two segments and is therefore not the best choice as a pattern. It is very hard to measure this accurately with the rudder post installed. Does have a drawing or any thoughts about creating one? This would be shared amongst the collective of course! Dave - 33ii Sent from my iPhone Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
