Mike, I know I am getting distracted from the original question, but I have to ask –
Around the eighth picture from the bottom, there is a shot of some weld on a rudder shaft – it is obviously aluminum TIG weld, but the shaft looks like stainless, I have never heard of an aluminum rudder post on these boats. And it looks like it really toasted the fiberglass – do you know if your shaft is Aluminum? Bill Coleman Entrada, Erie, PA From: Hoyt, Mike via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Tuesday, March 30, 2021 9:24 AM To: 'Stus-List' Cc: Phil Walsh (phil.wa...@gmail.com); Hoyt, Mike Subject: Stus-List Re: Rudder post bearing for 33ii I am copying my friend Phil who manufactured rudder bushings for Persistence. We also had some wear on the post just above the rudder that made it slightly out of round and induced fore / aft play. Phil may be able to comment on how he took the measurements and manufactured the bushings and the product/process he used to build up the post and return it to its original specifications. The Frers 33 is very similar to C&C33-2 and of the same vintage so the process and products would be very similar Persistence rudder is back in the boat and steering connected and play is gone. A link to the project can be found here http://www.hoytsailing.com/RudderBearing.htm Mike Hoyt Persistence Halifax, NS www.hoytsailing.com From: Joel Delamirande via CnC-List <cnc-list@cnc-list.com> Sent: March 30, 2021 10:04 AM To: Stus-List <cnc-list@cnc-list.com> Cc: Joel Delamirande <joel.delamira...@gmail.com> Subject: Stus-List Re: Rudder post bearing for 33ii Does south shore yacht still have bearing for the rudder? I need one for mine mk1 30 1973 On Tue, Mar 30, 2021 at 8:45 AM Paul Fountain via CnC-List <cnc-list@cnc-list.com> wrote: Is this the delrin ring around the top of the rudder post ? When ours gave up (split) I got one from SouthShore that was a good fit, had to get the pin also as the old one was bent before we bought Perception. Going to be time for another soon I am sure ... so interested in what you find. -----Original Message----- From: Dave S via CnC-List <cnc-list@cnc-list.com> Sent: March 29, 2021 9:16 PM To: C&c Stus List <cnc-list@cnc-list.com> Cc: Dave S <syerd...@gmail.com> Subject: Stus-List Rudder post bearing for 33ii So, Mike and me was talkin’..... Both our boats have had the rudder post bearing replaced - I was fortunate to have an almost intact original and was able to fabricate a pretty good replacement - mike was not so lucky and has a serviceable but temporary solution in play. I would like to create (really, have someone more digitally capable create) an accurate drawing and maybe make up a few of these. My original is broken into two segments and is therefore not the best choice as a pattern. It is very hard to measure this accurately with the rudder post installed. Does have a drawing or any thoughts about creating one? This would be shared amongst the collective of course! Dave - 33ii Sent from my iPhone Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Joel Delamirande <https://drive.google.com/uc?id=0Bzdvlj_zFQR9UUZyRjFCM0FGejZXeGd5WFVnVTZRb0Y0Q1lZ&export=download> www.jdroofing.ca
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu