It works. 3vdc. The battery is 1.5 I think. There may be a better choice. Just need to get the motor and shaft diameters right and the voltage close.
-- Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Dec 7, 2020 at 10:40 AM Matthew <wolf...@erie.net> wrote: > Is that the correct voltage? > > > > *From:* Dennis C. <capt...@gmail.com> > *Sent:* Monday, December 07, 2020 11:35 AM > *To:* Stus-List <cnc-list@cnc-list.com> > *Subject:* Stus-List Re: Solar Vents > > > > FWIW, the motor I used to replace the original in my Nicro/Marinco vent > was this: > > > > > https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm > > > > Wasn't a direct replacement but if one is somewhat handy, one should make > it work. > > > > Although any RF-500TB motor should work. Here's a copy of the specs on > the one above: > > > > · Voltage: 3V > > · Voltage range: 1-3V > > · Rated power output: 0.29W > > · Current at max. efficiency: 175mA > > · Max. efficiency: 60% > > · Max.Torque: 68.01 g-cm > > · Max. RPM: 2104 > > · No load RPM: 2700 > > · No load current: 55mA > > · Shaft size: 0.078" Diameter x 0.34"L > > · Motor Size: 1.25" Diameter x 0.77"L > > -- > > Dennis C. > > Touche' 35-1 #83 > > Mandeville, LA > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Dennis C. Touche' 35-1 #83 Mandeville, LA
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
