FYI, that particular vendor does not ship to Canada but Jameco
Electronics has the same part and they will.
Thanks Dennis.
Steve Thomas
1978 C&C27 MKIII
1980 C&C36 MKI
------ Original Message ------
From: capt...@gmail.com
To: cnc-list@cnc-list.com
Sent: Monday, December 7, 2020 11:34 AM
Subject: Stus-List Re: Solar Vents
FWIW, the motor I used to replace the original in my Nicro/Marinco vent
was this:
https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm
<https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm>
Wasn't a direct replacement but if one is somewhat handy, one should
make it work.
Although any RF-500TB motor should work. Here's a copy of the specs on
the one above:
* Voltage: 3V
* Voltage range: 1-3V
* Rated power output: 0.29W
* Current at max. efficiency: 175mA
* Max. efficiency: 60%
* Max.Torque: 68.01 g-cm
* Max. RPM: 2104
* No load RPM: 2700
* No load current: 55mA
* Shaft size: 0.078" Diameter x 0.34"L
* Motor Size: 1.25" Diameter x 0.77"L
--
Dennis C.
Touche' 35-1 #83
Mandeville, LA
Thanks to all of the subscribers that contributed to the list to help
with the costs involved. If you want to show your support to the list -
use PayPal to send contribution -- https://www.paypal.me/stumurray
<https://www.paypal.me/stumurray> Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
